Hello, I am trying to use the network adapter based on the Intel® 82599 10 Gigabit Ethernet Controller with ixgbe-2.2.3 driver. The driver loads properly but ifconfig shows "no carrier" for all ix* interfaces. The adapter shouldn't be corrupt though - I've tested this adapter on the same machine with Linux (Ubuntu) and it worked properly.
Can you please provide me with some information about supporting this adapter (pciID:0x10fb) ? If the chip is supported, then could you tell me please what would be my next steps to get it work (in -CURRENT if possible)? Ask me if you need more information about software and hardware configurations on the machine where I use the this network adapter. Thanks, Alex P.S. Some outputs that provide more information about the configuration on my machine: % uname -v FreeBSD 9.0-CURRENT #1 % sysctl kern.osreldate kern.osreldate: 900014 % pciconf -lv | grep ix i...@pci0:1:0:0: class=0x020000 card=0x00038086 chip=0x10fb8086 rev=0x01 hdr=0x00 i...@pci0:1:0:1: class=0x020000 card=0x00038086 chip=0x10fb8086 rev=0x01 hdr=0x00 % sysctl dev.ix.0 dev.ix.0.%desc: Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.2.3 dev.ix.0.%driver: ix dev.ix.0.%location: slot=0 function=0 dev.ix.0.%pnpinfo: vendor=0x8086 device=0x10fb subvendor=0x8086 subdevice=0x0003 class=0x020000 dev.ix.0.%parent: pci1 dev.ix.0.stats: -1 dev.ix.0.debug: -1 dev.ix.0.flow_control: 3 dev.ix.0.advertise_gig: 0 dev.ix.0.enable_aim: 1 dev.ix.0.rx_processing_limit: 128 % cat /var/log/messages | grep ix | tail -20 Jul 15 18:31:38 ringmap-2 kernel: ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.2.3> port 0xac00-0xac1f mem 0xfe780000-0xfe7fffff,0xfe77c000-0xfe77ffff irq 16 at device 0.0 on pci1 Jul 15 18:31:38 ringmap-2 kernel: ix0: Using MSIX interrupts with 9 vectors Jul 15 18:31:38 ringmap-2 kernel: ix0: [ITHREAD] Jul 15 18:31:38 ringmap-2 kernel: ix0: Ethernet address: 00:1b:21:5a:67:70 Jul 15 18:31:38 ringmap-2 kernel: ix0: PCI Express Bus: Speed 2.5Gb/s Width x8 Jul 15 18:31:38 ringmap-2 kernel: ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.2.3> port 0xa800-0xa81f mem 0xfe680000-0xfe6fffff,0xfe778000-0xfe77bfff irq 17 at device 0.1 on pci1 Jul 15 18:31:38 ringmap-2 kernel: ix1: Using MSIX interrupts with 9 vectors Jul 15 18:31:38 ringmap-2 kernel: ix1: RX Descriptors exceed system mbuf max, using default instead! Jul 15 18:31:38 ringmap-2 kernel: ix1: [ITHREAD] Jul 15 18:31:38 ringmap-2 kernel: ix1: Ethernet address: 00:1b:21:5a:67:71 Jul 15 18:31:38 ringmap-2 kernel: ix1: PCI Express Bus: Speed 2.5Gb/s Width x8 _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
