Try the driver in HEAD, I am going to MFC that shortly anyway. Jack
On Mon, May 24, 2010 at 4:16 AM, Ronald van der Pol < ronald.vander...@rvdp.org> wrote: > An 'ifconfig ix0 mtu 1500' works fine, but 'ifconfig ix0 mtu 1501' > causes a panic. It was either a "RX ring hdr initialization failed!" > or a "RX ring pkt initialization failed!" (sorry, I did not write it > down because I thought it would be in the logs). > > This is with a 8-STABLE cvsup'd yesterday: > FreeBSD XXXXXXX 8.1-PRERELEASE FreeBSD 8.1-PRERELEASE #4: Sun May 23 > 17:23:39 CEST 2010 r...@xxxxx:/usr/obj/usr/src/sys/GENERIC amd64 > > ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.1.7> > port 0xece0-0xecff mem 0xdf1a0000-0xdf1bffff,0xdf1c0000-0xdf1fffff, > 0xdf19c000-0xdf19ffff irq 34 at device 0.0 on pci5 > ix0: Using MSIX interrupts with 9 vectors > ix0: [ITHREAD] > ix0: [ITHREAD] > ix0: [ITHREAD] > ix0: [ITHREAD] > ix0: [ITHREAD] > ix0: [ITHREAD] > ix0: [ITHREAD] > ix0: [ITHREAD] > ix0: [ITHREAD] > ix0: Ethernet address: 00:1b:21:49:56:61 > ix0: PCI Express Bus: Speed 2.5Gb/s Width x8 > > ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > > options=5bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,LRO> > ether 00:1b:21:49:56:61 > inet 10.0.1.1 netmask 0xffffff00 broadcast 10.0.1.255 > media: Ethernet autoselect (10Gbase-SR <full-duplex>) > status: active > > rvdp > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org" > _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
