Greetings,
I've been having some issues with a new Marvell based on-board card.
Every few days the card (or at least the TCP/IP part) stops
functioning. I can revive it with a /etc/rc.d/netif restart &&
/etc/rc.d/routing restart. However, it will just happen again a few
days later. I've tried the hw.msk.msi_disable=1 tunable in loader.conf
(not even sure if it would make a difference, but I tried).
What else can I do to help troubleshoot the driver?
pciconf output
ms...@pci0:2:0:0: class=0x020000 card=0x31131297 chip=0x438011ab
rev=0x10 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = 'Marvell Yukon 88E8057 PCI-E Gigabit Ethernet
Controller (88E8057)'
class = network
subclass = ethernet
dmesg:
mskc0: <Marvell Yukon 88E8057 Gigabit Ethernet> port 0xee00-0xeeff mem
0xfdbfc000-0xfdbfffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon Ultra 2 Id 0xba Rev 0x00> on mskc0
msk0: Ethernet address: 00:30:**:**:**:**
miibus0: <MII bus> on msk0
Thanks for any help,
Ryan
--
Ryan P Sommers
ry...@rpsommers.com
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
