On Thu, Dec 17, 2009 at 12:00:17PM +0200, Alexander Kapshuk wrote: > Dear FreeBSD-net Community, > > I have trouble with FreeBSD 7.2 as well as PCBSD 7.1.1 detecting my > NIC properly. > > Please see below for some technical details related to the problem. > > output of less /var/run/dmesg.boot | grep re0 > > re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff > mem 0xd4010000-0xd4010fff,0xd4000000-0xd400ffff irq 17 at device 0.0 > on pci3 > re0: Using 1 MSI messages > re0: Chip rev. 0x24800000 > re0: MAC rev. 0x00400000 > re0: Unknown H/W revision: 0x24c00000 > device_attach: re0 attach returned 6 > re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff > mem 0xd4010000-0xd4010fff,0xd4000000-0xd400ffff irq 17 at device 0.0 > on pci3 > re0: Using 1 MSI messages > re0: Chip rev. 0x24800000 > re0: MAC rev. 0x00400000 > re0: Unknown H/W revision: 0x24c00000 > device_attach: re0 attach returned 6 > re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff > mem 0xd4010000-0xd4010fff,0xd4000000-0xd400ffff irq 17 at device 0.0 > on pci3 > re0: Using 1 MSI messages > re0: Chip rev. 0x24800000 > re0: MAC rev. 0x00400000 > re0: Unknown H/W revision: 0x24c00000 > device_attach: re0 attach returned 6 > re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff > mem 0xd4010000-0xd4010fff,0xd4000000-0xd400ffff irq 17 at device 0.0 > on pci3 > re0: Using 1 MSI messages > re0: Chip rev. 0x24800000 > re0: MAC rev. 0x00400000 > re0: Unknown H/W revision: 0x24c00000 > device_attach: re0 attach returned 6 >
Support for the controller was made in r195675 and the change was already MFCed to stable/8 and stable7. Try recent CURRENT or 8/stable and 7/stable. I guess you can download the following files from latest stable/7 via web interface and rebuilding both re(4) and rl(4) on your 7.2-RELEASE should make your controller recognized. http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/re/if_re.c http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/pci/if_rl.c http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/pci/if_rlreg.h > output of pciconf -l | grep re0 > > r...@pci0:3:0:0: class=0x020000 card=0x306a103c chip=0x813610ec rev=0x02 > hdr=0x00 > > output of ifconfig > > ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 00:24:2c:5e:06:f2 > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > ssid "" channel 1 (2412 Mhz 11b) > authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan > bgscanintvl 300 bgscanidle 250 roam:rssi11b 7 roam:rate11b 1 burst > bintval 0 > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 > inet6 ::1 prefixlen 128 > inet 127.0.0.1 netmask 0xff000000 > pflog0: flags=0<> metric 0 mtu 33204 > pfsync0: flags=0<> metric 0 mtu 1460 > syncpeer: 224.0.0.240 maxupd: 128 > > > Please let me know if you require further details that might be of help. > > Look forward to hearing from anyone who would care to help at your > convenience. > > Regards, > > Alexander Kapshuk. _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
