Heh. Not a problem.
Kurt On Mon, Dec 14, 2009 at 11:57, Jack Vogel <jfvo...@gmail.com> wrote: > Hmmm, well there's a LOT of shared code changes between 7.1 and 8, and this > sounds like something in the device init. I don't really have time to look > into the > difference right now, you'll just have to live with the difference, sorry > :) > > Jack > > > On Mon, Dec 14, 2009 at 11:52 AM, Kurt Buff <kurt.b...@gmail.com> wrote: >> >> Interesting. >> >> I'm doing nothing really very different on my 7.1R box, but don't have >> this issue. >> >> Oh, well - just something to keep in mind, I suppose. >> >> Kurt >> >> On Mon, Dec 14, 2009 at 11:48, Jack Vogel <jfvo...@gmail.com> wrote: >> > Usually assigning an address will bring it up, but you arent doing that, >> > I >> > am >> > pretty sure using a pseudo device will always necessitating explicitly >> > bringing >> > it up, at least i know that is the case for VLANs also. >> > >> > Jack >> > >> > >> > On Mon, Dec 14, 2009 at 11:39 AM, Kurt Buff <kurt.b...@gmail.com> wrote: >> >> >> >> Sigh. Yes, that works. >> >> >> >> So, to expose even more of my ignorance, any thoughts on why it isn't >> >> up at boot? >> >> >> >> Kurt >> >> >> >> On Mon, Dec 14, 2009 at 11:35, Jack Vogel <jfvo...@gmail.com> wrote: >> >> > Not familiar with ntop, but I notice below that the em interface is >> >> > not >> >> > UP, >> >> > what >> >> > if you `ifup em0` ? >> >> > >> >> > Jack >> >> > >> >> > >> >> > On Mon, Dec 14, 2009 at 11:29 AM, Kurt Buff <kurt.b...@gmail.com> >> >> > wrote: >> >> >> >> >> >> All, >> >> >> >> >> >> I'm having a very strange problem. I'm running ntop - the unnumbered >> >> >> interface is not receiving any data. >> >> >> >> >> >> Running 'tcpdump -i em0' also gets no data. I am really baffled - >> >> >> I've >> >> >> tried it against a switch that I know has a correctly configured >> >> >> mirror port, as I have ntop running on another machine and that >> >> >> works >> >> >> fine in the same port, but it's running 7.1-RELEASE. >> >> >> >> >> >> Anyone have thoughts on this? >> >> >> >> >> >> >> >> >> # uname -a >> >> >> FreeBSD zntop.mycompany.com 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Sat >> >> >> Nov 21 15:48:17 UTC 2009 >> >> >> r...@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 >> >> >> >> >> >> # cat /etc/rc.conf >> >> >> hostname="zntop.mycompany.com" >> >> >> ifconfig_rl0="DHCP" >> >> >> ntpdate_enable="YES" >> >> >> ntpdate_flags="-b 192.168.10.191" >> >> >> sshd_enable="YES" >> >> >> ntop_enable="YES" >> >> >> ntop_flags="-d -u ntop -P /home/ntop/databases -K -L -t 6 -o -i em0 >> >> >> -W >> >> >> 0" >> >> >> >> >> >> zntop# ifconfig >> >> >> em0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu >> >> >> 1500 >> >> >> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> >> >> >> ether 00:1b:21:04:2a:c5 >> >> >> media: Ethernet autoselect (100baseTX <full-duplex>) >> >> >> status: active >> >> >> rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >> >> >> 1500 >> >> >> options=8<VLAN_MTU> >> >> >> ether 00:0c:46:b3:43:53 >> >> >> inet 192.168.24.51 netmask 0xffffff00 broadcast >> >> >> 192.168.24.255 >> >> >> media: Ethernet autoselect (100baseTX <full-duplex>) >> >> >> status: active >> >> >> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >> >> >> options=3<RXCSUM,TXCSUM> >> >> >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 >> >> >> inet6 ::1 prefixlen 128 >> >> >> inet 127.0.0.1 netmask 0xff000000 >> >> >> >> >> >> >> >> >> Kurt >> >> >> _______________________________________________ >> >> >> freebsd-net@freebsd.org mailing list >> >> >> http://lists.freebsd.org/mailman/listinfo/freebsd-net >> >> >> To unsubscribe, send any mail to >> >> >> "freebsd-net-unsubscr...@freebsd.org" >> >> > >> >> > >> > >> > > > _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
