2008/12/1 Pyun YongHyeon <[EMAIL PROTECTED]>: > On Sun, Nov 30, 2008 at 03:18:41AM +0000, Andrew Tulloch wrote: > > I've just installed from the FreeBSD 7.1-BETA1 iso and get the > > following when the re driver attempts to attach to the two onboard > > NICs found on a Gigabyte GA-EX58-UD5 motherboard: > > > > re0: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit > > Ethernet> port 0x9e00-0x9eff mem > > 0xfd3ff000-0xfd3fffff,0xfd3f8000-0xfd3fbfff irq 16 at device 0.0 on > > pci8 > > re0: Chip rev. 0x28000000 > > re0: MAC rev. 0x00100000 > > re0: Unknown H/W revision: 0x28000000 > > device_attach: re0 attach returned 6 > > pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 > > pci9: <ACPI PCI bus> on pcib9 > > re1: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit > > Ethernet> port 0x8e00-0x8eff mem > > 0xfd1ff000-0xfd1fffff,0xfd1f8000-0xfd1fbfff irq 17 at device 0.0 on > > pci9 > > re1: Chip rev. 0x28000000 > > re1: MAC rev. 0x00100000 > > re1: Unknown H/W revision: 0x28000000 > > device_attach: re1 attach returned 6 > > > > pciconf -lvc extract: > > [EMAIL PROTECTED]:8:0:0: class=0x020000 card=0xe0001458 > chip=0x816810ec rev=0x03 hdr=0x00 > > vendor = 'Realtek Semiconductor' > > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' > > class = network > > subclass = ethernet > > cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 > > cap 05[50] = MSI supports 1 message, 64 bit > > cap 10[70] = PCI-Express 2 endpoint IRQ 0 > > cap 11[ac] = MSI-X supports 4 messages in map 0x20 > > cap 03[cc] = VPD > > [EMAIL PROTECTED]:9:0:0: class=0x020000 card=0xe0001458 > chip=0x816810ec rev=0x03 hdr=0x00 > > vendor = 'Realtek Semiconductor' > > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' > > class = network > > subclass = ethernet > > cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 > > cap 05[50] = MSI supports 1 message, 64 bit > > cap 10[70] = PCI-Express 2 endpoint IRQ 0 > > cap 11[ac] = MSI-X supports 4 messages in map 0x20 > > cap 03[cc] = VPD > > > > > > Is there any simple patch I can apply to get the driver to attach, > > assuming it should work? > > > > This controller seems to support MSI-X with 4 messages. > Unfortunately previous PCIe controllers from RealTek were notorious > for MSI issues so it's hard to know this revision really works with > MSI-X. I guess it was added to support RSS(receive-side scaling of > MS NDIS 6.0). > As sephe said if the controller configuration is the same as 8168C > family, the attached patch would make re(4) work as expected. > > -- > Regards, > Pyun YongHyeon >
Pyun, I applied the patch, but it didn't attach initially, I added an extra entry to re_hwrevs as that seemed to be what was missing and it attached and seems to function (as far as a quick ping test and make update). Changes I made to if_re.c attached. If you have anything to try for MSI-X I can probably test those. Thanks, Andrew
re.patch
Description: Binary data
_______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
