Kevin Oberman wrote:
Date: Fri, 25 Apr 2008 16:48:46 -0300
From: "Tobias P. Santos" <[EMAIL PROTECTED]>
Kevin Oberman wrote:
Running 7-STABLE of April 10, if I disable the firewall ('sysctl
net.inet.ip.fw.enable=0'), IPv4 traffic passes, but IPv6 will not. I had
to add a "allow ip from any to any" rule to get IPv6 to work pass
traffic. (Since I was accessing the system in question via IPv6, this
was a bit annoying!)
Am I missing anything? The rc.subr script for ipfw just sets the sysctl I
did when it stops the firewall.
<snip>
net.link.ether.ipfw: 0
net.inet6.ip6.fw.enable: 1 <------------ voila!!!
net.inet6.ip6.fw.debug: 1
<snip>
Thanks! I need to file a PR to get that into the rc script. I should
have looked for a inet6 specific sysctl for this.
Hate to say this but....
#
# $FreeBSD: src/etc/rc.d/ip6fw,v 1.9 2007/04/02 15:38:53 mtm Exp $
#
# PROVIDE: ip6fw
# REQUIRE: routing
# BEFORE: network_ipv6
# KEYWORD: nojail
. /etc/rc.subr
name="ip6fw"
rcvar=`set_rcvar ipv6_firewall`
start_cmd="ip6fw_start"
stop_cmd="${SYSCTL_W} net.inet6.ip6.fw.enable=0"
required_modules="ipfw"
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
