Alexandre Biancalana wrote:
On 1/30/08, Tom Judge <[EMAIL PROTECTED]> wrote:
....
Do you have any error messages on the console in dmesg? ('cannot pad
short frame', 'unable to prepend vlan header' for example).
no :(
Sorry I'm fresh out of ideas now... Unless you could be should of ram
what does netstat -m look like? Also you could look at changing
if_vlan.c to print the error number of the error if IFQ_HANDOFF fails.
Me too... This should be much simple... I can't imagine why so much
trouble in this configuration, I have a similar setup with linux :(
and have no problem at all...
# netstat -m
938/2347/3285 mbufs in use (current/cache/total)
936/1860/2796/32768 mbuf clusters in use (current/cache/total/max)
936/1860 mbuf+clusters out of packet secondary zone in use (current/cache)
0/0/0/0 4k (page size) jumbo clusters in use (current/cache/total/max)
0/0/0/0 9k jumbo clusters in use (current/cache/total/max)
0/0/0/0 16k jumbo clusters in use (current/cache/total/max)
2109K/4306K/6415K bytes allocated to network (current/cache/total)
0/3/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
0/0/0 requests for jumbo clusters denied (4k/9k/16k)
0/7/4544 sfbufs in use (current/peak/max)
0 requests for sfbufs denied
0 requests for sfbufs delayed
0 requests for I/O initiated by sendfile
229 calls to protocol drain routines
Cant see any issues here.
Is the vlan solution designed to work with multiple concurrent 100M
networks using the same Gbit interface ? or Am I thinking in a wrong ?
I want to have a central firewall in my network, filtering ALL the
traffic between ALL internal networks and external links. I already
done that using physical nics, ( I had one machine with 8 nic) but now
I have one machine with 2 gigabit nics and want to configure multiple
vlan on top this for the internal networks and external links.
Am I wrong to think that this should work ??
The concepts and configuration seems fine to me.
Do you by any change have Q-in-Q enabled anywhere on your network?
Could you try this patch (attached) to see what error you are getting
from IFQ_HANDOFF? (you will need to apply if from in sys/net and
rebuild your kernel or vlan module).
Tom
--- if_vlan.c.orig 2008-01-30 15:09:46.000000000 +0000
+++ if_vlan.c 2008-01-30 15:20:29.000000000 +0000
@@ -864,10 +864,12 @@
* We are already running at splimp.
*/
IFQ_HANDOFF(p, m, error);
- if (!error)
+ if (!error) {
ifp->if_opackets++;
- else
+ } else {
ifp->if_oerrors++;
+ if_printf(ifp, "error during IFQ_HANDOFF: %d\n", error);
+ }
}
}
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
