On Wed, 12 Dec 2007, Randy Bush wrote: > > did you start off with? > > > > # ifconfig bridge create > > > > when your ifconfig -a should then also show: > > > > bridge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > (etc) > > > > though it looks like 'cloned_interfaces=bridge0' is supposed to do that. > > > > cheers, Ian > > sorry, cut and paste error with screen. lo0 missing too :) > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > inet6 ::1 prefixlen 128 > inet 127.0.0.1 netmask 0xff000000 > bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > 1500 > ether 2a:ba:6b:d8:1d:0d > id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 > maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 > root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
Ah. Well the only other thing i noticed (after posting) was that each of vr1 to vr3 showed as UP, but: > media: Ethernet autoselect (none) > status: no carrier but I don't know whether that should matter? cheers, Ian _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"