Randy Bush wrote:
Andrew Thompson wrote:
On Wed, Sep 26, 2007 at 04:07:00PM -1000, Randy Bush wrote:
current i386 thinkpad t41
ifconfig_lo0="inet 127.0.0.1/8"
cloned_interfaces="bridge0"
ifconfig_bridge0="inet 192.168.0.3/24 addm em0 addm ath0 up"
ifconfig_em0="up"
ifconfig_ath0="ssid rgnet up"
defaultrouter="192.168.0.1"
with ether plugged in, i can ping it. unplug ether and no ping over
ath0. other hosts are on same ssid and working.
I will try to reproduce this in the weekend. Just to make sure, you are
pinging 192.168.0.3 from a remote wireless node connected to ath0, and
unplugging em0 causes this to fail?
connect both wireless and ether. it is pingable. disconnect ether. no
can ping.
reduce to
ifconfig_ath0="inet 192.168.0.3/24 ssid rgnet up"
with no em0, bridge, ... and it is pingable.
Be sure apbridge is enabled so the 802.11 layer does intra-bss bridging;
otherwise traffic must be fwd'd by a bridge component (should be on by
default). Also you can use tcpdump to check traffic on each interface
to isolate the issue.
Sam
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
