> This is not the case. Flood ping doesn't reach the limit in any > way. Have a look at the ping man page and flood ping description.
Ah yes, I was forgetting about the strict synchrony. > Stock FreeBSD 6.2 or 7.0 can easily do 500kpps with good network > cards and fastforwarding enabled. On a dual-Opteron 2.6GHz with > PCI-X Intel and Broadcom network cards I've done 800kpps in-out. What is the throughput when fastforwarding is not used and packets go to different destinations? Note that typically fastforwarding does not help much on a router since only one route is cached. > > Listen to what Louis Mamakos said! Use FreeBSD primarily for > > the control plane. May be there are NICs where you can > > offload some packet forwarding.... But that is a substantial > > change to FreeBSD. Or live with what FreeBSD can do on a > > given box. > > There are no NICs known that can do packet forwarding offload. > And neither is there support in FreeBSD for that. You're probably > confusing this with checksum offloading or TSO (TCP segmentation > offloading) which isn't an issue with packet forwarding at all. Indeed. That is why I said "that is a substantial change to FreeBSD"! But even offloading checksum can help as the CPU has less to do. > I'm running all my routing on FreeBSD since about 1998. No > problems and much more reliable than the countless Cisco IOS > versions that have been deprecated since then. On any more > recent platform or new line card you have to run IOS T versions > which is most of the time is much worse than running FreeBSD-current > on a production machine. It's probably cheaper to pay FreeBSD > developers to fix any issues you find or run into than to pay > Cisco for the pretty much mandatory service contract where any > useful level starts at some 14% annually of the purchase price. > And even then you have to pay for TAC cases and you are last in > the queue relative to all others who pay more. This is fine if he was building one or a few for his own company's use but for selling routers to a third party you have to productize the software and provide tighter bounds on when you will fix critical bugs. Also, what works for Cisco won't work for a startup. Even if you provide free service they may not want to buy your product! > Can't comment on VPN or IPSEC stuff. Never used that to any > significant extent. However keep in mind that for the price > of a single high powered Cisco or Juniper you can buy a very > large number of also quite well powered FreeBSD powered routers. Agreed! > My recommendation for a optimal FreeBSD based router is as follows: > CPU Core2 Duo or Athlon 64X2, more cores don't help in any way. One > core can take the interrupts and one can continue to serve userland. > A quality mainboard from Tyan, Supermicro or Intel with PCI-Express. > A number of (dual-port) Intel Gigabit PCI-E network cards. Some two > GB of RAM and a flash based ATA or SATA harddisk. Good case, redundant > power supplies, good fans and otherwise no movable parts. Don't try > RAID1 or stuff like that, causes more problems than it solves. Go for > a single flash disk that is replaceable without having to disassemble > the entire case. There are some 3.5" based flash disks on the market > or buy a CF to ATA adapter for mounting into a 3.5" disk slot and use > normal but fast CF cards. That'll do it. May be! _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
