On Sat, 4 Aug 2007, Giles Williams wrote:
Hi,
Cc:ing net@ again
Thanks for getting back to me!
I've looked, and udav is loaded, I already tried that a while back. Execing
usbdevs -v gives:
bsdbox# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
port 1 addr 2: full speed, power 144 mA, config 1, Davicom CO., LTD(0x9601),
DM9601 USB NNC(0x0a46), rev 1.01
port 2 powered
For FreeBSD HEAD sources it looks like this:
...
} udav_devs [] = {
/* Corega USB-TXC */
{{ USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB_TXC }, 0},
/* ShanTou ST268 USB NIC */
{{ USB_VENDOR_SHANTOU, USB_PRODUCT_SHANTOU_ST268 }, 0},
#if 0
/* DAVICOM DM9601 Generic? */
/* XXX: The following ids was obtained from the data sheet. */
{{ 0x0a46, 0x9601 }, 0},
#endif
};
...
As you can see, you ID is disabled with the #if 0. It seems it was
that way since the very first version. I cannot say what it's the way
it is.
You could try to change it to #if 1 and recompile and see if it
panics or works...
--
Bjoern A. Zeeb bzeeb at Zabbadoz dot NeT
Software is harder than hardware so better get it right the first time.
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
