Hi Max,
You didn't say, can you configure the carp interfaces by manual ifconfig?
That would indicate a problem in the netstart/rc.d part. Maybe
mergemaster again?
I get an error when trying to configure it manually via ifconfig. I
don't know what this means.
test# ifconfig carp0 create
test# ifconfig
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet 10.1.0.201 netmask 0xffffff00 broadcast 10.1.0.255
ether 00:30:48:11:64:85
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
fxp1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
ether 00:30:48:11:6f:68
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
carp0: flags=8<LOOPBACK> mtu 1500
and then:
test# ifconfig carp0 vhid 801 pass mekmitasdigoat 10.1.0.101/24
ifconfig: SIOCSVH: Invalid argument
thanks,
steve
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
