Hello.
rl from Acer Aspire 3610 don't work under FreeBSD 6.2-BETA3
ifconfig show no carrier. Manual "media 100baseTX" don't help.
$ grep rl0 dmesg.boot
pcib1: rl0 requested I/O range 0x3000-0x30ff: in range
pcib1: rl0 requested I/O range 0x3000-0x30ff: in range
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 0xb0100000-0xb01000ff
irq 20 at device 7.0 on pci6
pcib1: rl0 requested I/O range 0x3000-0x30ff: in range
miibus0: <MII bus> on rl0
rl0: bpf attached
rl0: Ethernet address: 00:0a:e4:e4:8c:fa
rl0: [MPSAFE]
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
[EMAIL PROTECTED]:7:0: class=0x020000 card=0x006a1025 chip=0x813910ec
rev=0x10 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
class = network
subclass = ethernet
When system boot with acpi I see many errors like:
acpi_ec0: EcRead: Failed waiting for EC to send data.
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node
0xc43b6da0), AE_NO_HARDWARE_RESPONSE
acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE
acpi_ec0: EcRead: Failed waiting for EC to send data.
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node
0xc43b6da0), AE_NO_HARDWARE_RESPONSE
acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE
I try to boot without acpi, but it also don't work.
How I can debug this problem?
Under WinXP this network card work fine.
dmesg output available here:
http://citrin.ru/tmp/aspire3610/
--
WBR,
Anton Yuzhaninov
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
