ASHA GOWDA wrote:
Hi ,
For testing MLFR application in the MLFR to FR
direction, we are sending IP over PPP Packet through
Adtech Multi Layer ports.
We need to make some changes in the PPP Header to be
used for MLFR Traffic.
does mlfr require ppp?
why not just use mlppp?
Can we know the changes to be made for the same(like
PID to be used nad seq no....)?
Our test setup is like this :
Our Target Machine was connected on one side to Adtech
OC -12 Port and the other side was connected to Multi
Layer OC-12 Port.
You should probably write a netgraph-capable driver for the card, as teh
frame relay
drivers etc are all netgraph and it will probably make it easier for you
if you do this.
Multi Layer Port of Adtech was used for MLFR side(MLFR
to FR side) and general OC-12 Port of Adtech was used
FR side(FR to MLFR side)
you don't say what release of FreeBSD you are doing this on... (or even
if it IS freeBSD you are using)
Thanks in advance!!!!!
Asha.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
