Hi List,

I've a gateway running FreeBSD 4.11-STABLE doing ip filtering, routing and ipx routing among 4 internal networks and 4 external networks.

Everything was working perfectly, with the following network adapters: one 3Com 3c905C-TX Fast Etherlink XL, two Intel 82559 Pro/100 Ethernet and one quad D-Link DFE-550TX 10/100BaseTX. I had one network attached to each network interface, the ef module loaded to support multiple novell ethernet frames types, ipxgateway enable and ipxrouted -s running. Due to need of more ip addresses on a new departament of the company, I need to configure a new network on this gateway, then I decided to put an existent network and the new one at a single network interface putting each network on a single vlan. After change the configuration the stations on the vlan networks can't reach the Novell server.

  The old configuration:

   fxp0: external network
   fxp1: external network
   xl0:   external network
   ste0:  internal network 1
   ste0f0:  internal  ipx network Ethernet_II
   ste0f1:  internal  ipx network Ethernet_802.3
   ste0f2:  internal  ipx network Ethernet_802.2
   ste0f3:  internal  ipx network Ethernet_802.2/SNAP
   ste1:  internal network 2
   ste1f0:  internal  ipx network Ethernet_II
   ste1f1:  internal  ipx network Ethernet_802.3
   ste1f2:  internal  ipx network Ethernet_802.2
   ste1f3:  internal  ipx network Ethernet_802.2/SNAP
   ste2:  internal netowrk 3
   ste2f0:  internal  ipx network Ethernet_II
   ste2f1:  internal  ipx network Ethernet_802.3
   ste2f2:  internal  ipx network Ethernet_802.2
   ste2f3:  internal  ipx network Ethernet_802.2/SNAP
   ste3:  internal network 4
   ste3f0:  internal  ipx network Ethernet_II
   ste3f1:  internal  ipx network Ethernet_802.3
   ste3f2:  internal  ipx network Ethernet_802.2
   ste3f3:  internal  ipx network Ethernet_802.2/SNAP

In the new configuration I added two vlans attached to ste3 then:

   vlan4: internal network 4 parent ste3
   vlan6: internal network 5 parent ste3
The ste3f* interfaces continue configured as before.

My doubt is when I created the vlans the system should be created vlan4f* or the ipx should work in the same ste3f* interfaces... The only thing that is not working is ipx access from network 4 to novell server at network 1. Any Ideas ??

Best Regards,
Alexandre
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to