Using ngctl as suggested in the "All About Netgraph" Daemon News
article (http://people.freebsd.org/~julian/netgraph.html ) by Archie
Cobbs I get the following output:
[EMAIL PROTECTED] nghook -a fxp0: divert
nghook: can't connect to node
[EMAIL PROTECTED] ngctl list
There are 1 total nodes:
Name: ngctl4352 Type: socket ID: 00000005 Num hooks: 0
According to the article my four Ethernet interefaces (see ifconfig output
below) should display
as persistent nodes. Any reason why they do not appear? I compiled a custom
kernel on two separate
occasions, first to support IPFW/Dummynet, then later, Netgraph.
Thanks,
Tom Benjamin
##### kernel options added for 1st compile (IPFW)
options BRIDGE
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT
options DUMMYNET
options NMBCLUSTERS
options HZ=1000
##### kernel options added for 2nd compile (NETGRAPH, plus forgot IPDIVERT in
1st compile)
options IPDIVERT
options NETGRAPH
##### end kernel options
# uname -a
FreeBSD ntp-2.labs.iptv 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu May 25 14:34:57
CDT 2006
[EMAIL PROTECTED] sysctl -a|grep graph
netgraph_path 0 0K - 30 16
netgraph_sock 0 0K - 5 64
netgraph_msg 0 0K - 30 64,128,256,1024
netgraph_node 0 0K - 5 256
net.graph.maxalloc: 512
net.graph.abi_version: 11
net.graph.msg_version: 8
net.graph.control.proto: 2
net.graph.data.proto: 1
net.graph.family: 32
net.graph.recvspace: 20480
net.graph.maxdgram: 20480
# ifconfig
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::2b0:d0ff:fee1:1754%fxp0 prefixlen 64 scopeid 0x1
inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
ether 00:b0:d0:e1:17:54
media: Ethernet autoselect (100baseTX)
status: active
fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::2b0:d0ff:fee1:1755%fxp1 prefixlen 64 scopeid 0x2
inet 10.3.40.250 netmask 0xffffff00 broadcast 10.3.40.255
ether 00:b0:d0:e1:17:55
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::20f:b5ff:fe46:8e17%sis0 prefixlen 64 scopeid 0x3
inet 144.60.43.147 netmask 0xffffff00 broadcast 144.60.43.255
ether 00:0f:b5:46:8e:17
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
sis1: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
ether 00:0f:b5:46:59:63
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
netgraph_24may2006.txt
netgraph_26may2006.txt
--
==++==++==++==++==++==++==++==++==++==++==++==++==++==++==
Thomas Benjamin
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
