I can report even more regression with the most recent version (0409) :( My 2915 seems to work with RELENG_6_0 only. Not always though. Sometimes I had to reboot to make it associated. Plus the outgoing traffic problem.
I could only associate several times with older versions of RELENG_6. Well, at least the card was able to scan the channels. The scans were not very stable as all the channels where allowed. After typing # ifconfig iwi0 chanlist 6 the scans became almost stable (more than 80% success). But only occasional association anyway. I installed the most recent version today. Driver and firmware has initialized as usual. But I can't see my AP at all. Sorry, I don't have time to debug your patches now. Here comes excerpt from /var/log/messages with debug on if this would help: iwi0: ieee80211_next_scan: chan 165->1 iwi0: begin active scan in auto mode, scangen 107915 ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 1 iwi0: ieee80211_free_allnodes_locked: free all nodes in scan table iwi0: ieee80211_next_scan: chan 1->2 iwi0: received probe_resp from 00:11:95:94:63:96 rssi 82 [iwi0:00:11:95:94:63:96] discard probe_resp frame, for off-channel 6 iwi0: received beacon from 00:11:95:94:63:96 rssi 82 [iwi0:00:11:95:94:63:96] discard beacon frame, for off-channel 6 ieee80211_cancel_scan: end active scan iwi0: iwi0: notify scan done iwi0: ieee80211_end_scan: no scan candidate ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 2 iwi0: ieee80211_next_scan: chan 2->3 iwi0: begin active scan in auto mode, scangen 107916 ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 3 iwi0: ieee80211_free_allnodes_locked: free all nodes in scan table iwi0: ieee80211_next_scan: chan 3->4 iwi0: received probe_resp from 00:11:95:94:63:96 rssi 82 [iwi0:00:11:95:94:63:96] discard probe_resp frame, for off-channel 6 iwi0: received beacon from 00:11:95:94:63:96 rssi 80 [iwi0:00:11:95:94:63:96] discard beacon frame, for off-channel 6 iwi0: ieee80211_cancel_scan: end active scan iwi0: iwi0: notify scan done iwi0: ieee80211_end_scan: no scan candidate ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 4 iwi0: ieee80211_next_scan: chan 4->5 iwi0: begin active scan in auto mode, scangen 107917 ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 5 iwi0: ieee80211_free_allnodes_locked: free all nodes in scan table iwi0: ieee80211_next_scan: chan 5->6 iwi0: ieee80211_cancel_scan: end active scan iwi0: iwi0: notify scan done iwi0: ieee80211_end_scan: no scan candidate ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 6 iwi0: ieee80211_next_scan: chan 6->7 iwi0: begin active scan in auto mode, scangen 107918 ieee80211_reset_scan: scan set: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 start chan 7 iwi0: ieee80211_free_allnodes_locked: free all nodes in scan table iwi0: ieee80211_next_scan: chan 7->8 received probe_resp from 00:11:95:94:63:96 rssi 82 [iwi0:00:11:95:94:63:96] discard probe_resp frame, for off-channel 6 iwi0: received beacon from 00:11:95:94:63:96 rssi 82 [iwi0:00:11:95:94:63:96] discard beacon frame, for off-channel 6 iwi0: ieee80211_cancel_scan: end active scan iwi0: iwi0: notify scan done iwi0: ieee80211_end_scan: no scan candidate _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
