Hello.
I'm trying to get freevrrpd working on an AMD64 6.0p4 box with an xl0
and em0 machine.
Here is the config file:
[VRID]
serverid = 1
interface = xl0
priority = 254
addr = 192.168.0.4/32
password = xxxxx
vridsdep = 3
[VRID]
serverid = 2
interface = xl0
priority = 255
addr = 192.168.0.5/32
password = xxxxx
[VRID]
serverid = 3
interface = em0
priority = 254
addr = 192.168.101.5/32
password = xxxxx
vridsdep=1
monitoredcircuits=no
[VRID]
serverid=4
interface=em0
priority=255
addr=192.168.101.6/32
password=xxxxx
monitoredcircuits=no
This used to work until this box replaced the old machine which had fxp0
instead of em0; the other machine has fxp0 and fxp1.
I had to add monitoredcirtuits=no, otherwise em0 would connect and
disconnect (no carrier) at 2 secs intervals (I read this on a post
somewhere).
However this only solves part of the problems, since both boxes will
grab 192.168.101.5 and 192.168.101.6 at the same time.
The same post reports this is fixed in CVS, so I went to the master web
site and followed instructions to do so. However my connection is
refused and I suspect that's a problem with the CVS server side.
The other side (xl0) works perfectly.
I cannot switch to carp, since the other machine is running 4.11.
Any hint?
Has someone been able to download the CVS sources? If so, would it be
too much trouble sending them to me?
Any magic switch to put in conf?
Remove .diespammer to answer to me directly, please.
bye & Thanks
av.
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
