--- Gleb Smirnoff <[EMAIL PROTECTED]> wrote: > Oleg, Anders, > > can you please remove all your changes to if_bge.c and test the > attached patch. Awaiting for feedback and thanks.
It works fine - bge0 connected to GIGE switch, bge1 is not connected # snmpget -c pub -v 1 localhost ifSpeed.1 IF-MIB::ifSpeed.1 = Gauge32: 1000000000 # snmpget -c pub -v 1 localhost ifHighSpeed.1 IF-MIB::ifHighSpeed.1 = Gauge32: 1000 # ifconfig bge1 up # ifconfig bge1 media auto # snmpget -c pub -v 1 localhost ifSpeed.2 IF-MIB::ifSpeed.2 = Gauge32: 0 # snmpget -c pub -v 1 localhost ifHighSpeed.2 IF-MIB::ifHighSpeed.2 = Gauge32: 0 # ifconfig bge1 media 10baseT/UTP # snmpget -c pub -v 1 localhost ifSpeed.2 IF-MIB::ifSpeed.2 = Gauge32: 10000000 # snmpget -c pub -v 1 localhost ifHighSpeed.2 IF-MIB::ifHighSpeed.2 = Gauge32: 10 # ifconfig bge1 media 100baseTX # snmpget -c pub -v 1 localhost ifSpeed.2 IF-MIB::ifSpeed.2 = Gauge32: 100000000 # snmpget -c pub -v 1 localhost ifHighSpeed.2 IF-MIB::ifHighSpeed.2 = Gauge32: 100 It might be not important, but if adapter is in DOWN state snmp may show different media: 1. Adapter is Down. ifconfig shows - media: Ethernet autoselect (none) Snmp shows ifSpeed 0. 2. # ifconfig bge1 media 100baseTX. ifconfig shows - media: Ethernet 100baseTX (none) Snmp still shows ifSpeed 0. 3. # ifconfig bge1 up ifconfig shows - media: Ethernet 100baseTX (none) snmp shows ifSpeed 100000000 4. # ifconfig bge1 down snmp still shows ifSpeed 100000000 after running "ifconfig bge1" snmp shows ifSpeed 0 So sometimes ifconfig helps to change baudrate if adapter in DOWN state. Thanks, Oleg > -- > Totus tuus, Glebius. > GLEBIUS-RIPN GLEB-RIPE __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
