On Tue, 24 Jan 2006 11:19:05 +0100 Andre Oppermann <[EMAIL PROTECTED]> wrote: > Marvell/SysKonnect made the source code to the YukonII chips available > today under a BSD license: > http://people.freebsd.org/~andre/mykbsd60x86-8.12.1.3-src.tgz > I haven't tested the driver yet and I don't know if it available directly > from the their website already. > Many thanks to Gerald and Frank at SysKonnect for working with us and > making this possible!
Good works!! I confirmed it on 6.0R-p2, but I didn't test. # mkdir /usr/src/sys/dev/myk # cd /usr/src/sys/dev/myk # tar xvf mykbsd60x86-8.12.1.3-src.tgz # make clean all : # kldload ./if_myk.ko # dmesg : myk0: <Marvell 88E8050 Gigabit Ethernet Controller, Ver. 8.12.1.3> port 0xa800-0xa8ff mem 0xff720000-0xff723fff irq 17 at device 0.0 on pci4 myk0: Ethernet address: 00:13:20:b4:85:66 # ifconfig myk0 myk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_MTU,JUMBO_MTU> ether 00:13:20:b4:85:66 media: Ethernet autoselect status: no carrier _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"