FreeBSD 4.9 - char em_driver_version[] = "1.7.16";
I've tried multiple bridge configurations - from bridging just em0,em1 to
bridging two vlan's attached to each card. Unfortunately I don't have access
to the box at the moment - if its still necessary I will fetch the
information tomorrow (ifconfig etc)
To sum up its something like the following
net.inet.ether.bridge_config=em0,em1
net.inet.ether.bridge=1
Or vlan0,vlan1 with:
ifconfig vlan0 create
ifconfig vlan1 create
ifconfig vlan0 vlan 100 vlandev em0
ifconfig vlan1 vlan 100 vlandev em1
If I change to using fxp it immediately works..
Thanks for the help
Dave
-----Original Message-----
From: Gleb Smirnoff [mailto:[EMAIL PROTECTED]
Sent: 18 January 2006 04:59 PM
To: Dave Raven
Cc: freebsd-net@FreeBSD.org
Subject: Re: em driver + VLAN's
On Wed, Jan 18, 2006 at 03:12:27PM +0200, Dave Raven wrote:
D> Hi all,
D> I'm having an interesting problem at the moment. I want to bridge
D> between two cisco switches on trunk ports. Basically bridging vlans -
D> if I bridge my two main interfaces it works fine if they are fxp, but
D> not when I use em cards...
D>
D> Could this be related to the driver, or BSD in some way?
This probably can. What FreeBSD version are you using? Can you please show
ifconfig output and bridge configuration?
--
Totus tuus, Glebius.
GLEBIUS-RIPN GLEB-RIPE
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
