On 1/6/06, Andrew Thompson <[EMAIL PROTECTED]> wrote: > On Fri, Jan 06, 2006 at 03:23:33PM -0800, David Leimbach wrote: > > To whom it may concern. > > > > I've been using qemu with the vde port [until recently, the qemu port is too > > far ahead of the vde one now] on an x86 machine with FreeBSD 6 and using > > if_bridge to connect the tap0 interface with xl0 with great success. > > > > I tried to duplicate this configuration on a dual opteron machine that has > > Broadcom adapters and when I add the bge0 or bge1 interfaces to the bridge0 > > iface that I create I lose all connectivity. The moment I destroy the > > bridge0 interface, bge0 or bge1 as it may be begins responding again. > > > > The only thing the bridge does to the interface is put it in PROMISC > mode, can you try using tcpdump or similar to see if that is whats > causing the problem. > > > Andrew >
Thanks for the tip... I'll give it a shot and see what's going on. Dave _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"