----- Original Message -----
From: "Marcin Jessa" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, October 21, 2005 8:55 PM
Subject: Re: PPPoE and Radius on 6.0RC1
Thanks a lot.
I recompiled my kernel with the netgraph options and set up the
server with your configs. Besides from the fact that I only use my fxp0
in the tests.
root 787 0.0 0.1 1256 796 ?? Ss 2:41PM
0:00.02 /usr/libexec/pppoed -l PPPoE -P /var/run/pppoed.pid -p * fxp0
ok... but i would like to suggest your pppoe clients must be facing the ip
less interface nic so that clients would not put static configuration on
their side to defeat your pppoe configuration :->
I disabled radius as well adding username and password by
hand.
without radius does it worked?
Although the radius itself works fine when I test it with radtest
and user's credits.
Just like before, nothing gets loged in ppp.log and the ppp process
itself never gets started up by the pppoe daemon.
does your radius server supports microsoft chap version 2? my config given
to you only authenticates mschapv2...
"on receipt of the SUCCESS indication, pppoed
will execute exec /usr/sbin/ppp -direct label"
- This part is not taking place....
actually pppoed did executed ppp.... ppp will exit immediately if it sees
something wrong with its configuration, authentication and others...
fooler.
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
