Hello Marcin, MJ> man ifconfig should be the place to start. :) re read it 2 year, for information about MJ> Anyway, you can connect two PCs when one of them runs in MJ> hostap and the other one in ad-hoc mode. MJ> This will set up one of them as AP: MJ> ifconfig_ath0="inet 12.23.34.1 netmask 255.255.255.0 ssid Andrey mode MJ> 11g mediaopt hostap"
MJ> And one in adhoc: MJ> ifconfig_ath0="inet 12.23.34.1 netmask 255.255.255.0 ssid Andrey MJ> channel 6 mode 11g mediaopt adhoc" MJ> You can also run both atheros nics in ad-hoc mode and bridge their MJ> interfaces with wired nics. My most qestion - how increase speed for ad-hoc<=>ad-hoc connection. It mode have very small speed(40KBy/s) . For me important bridge on both sides for connect 2 wired LAN segments through air. When i connect client<=>hostup bridging not work (but speed 2MBy/s between this hosts). I am will try ad-hoc<=>hostap. MJ> And you can set up your atheros access point as apbridge which will MJ> pass packets between wireless clients directly. For me not enough for connect another WiFi clients, now configured -apbridge. MJ> You cannot connect two APs in hostap mode as they will never associate MJ> to one another. Thank you. -- Best regards, Andrey mailto:[EMAIL PROTECTED] _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
