On Sun, Sep 18, 2005 at 14:15 -0400, Benjamin Rosenblum wrote: ... > now the EM problem. > > when i am running a very high network load (streaming video, dumping > ALOT of data across the network, etc) the network card disconnects (i > loose pings and all my transfers drop) and 15-20 seconds later it pops > up on the console with "em0: Link is up 1000 Mbps Full Duplex" and then > it starts working again. again im at a dead wall and really want my > network to work properly so i can do what i need to do.
Hello! I've same problems on 5.4-STABLE: /var/run/dmesg.boot: FreeBSD 5.4-STABLE #5: Tue Sep 13 16:14:10 EEST 2005 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xbc00-0xbc1f mem 0xff8e0000-0xff8fffff irq 18 at device 1.0 on pci1 em0: Ethernet address: 00:0c:f1:cf:7e:b6 em0: Speed:N/A Duplex:N/A /etc/rc.conf: ifconfig_em0="inet ... netmask ... media 100baseTX mediaopt full-duplex" /var/log/messages: Sep 20 15:51:40 tak kernel: em0: Link is up 100 Mbps Full Duplex Sep 20 17:01:40 tak kernel: em0: Link is up 100 Mbps Full Duplex Sep 20 18:48:16 tak kernel: em0: Link is up 100 Mbps Full Duplex switch: Catalyst 3550 I changed ports: 100M to 1GB and back; changed cables, but... no positive results :( -- Maxim Tuliuk WWW: http://primats.org.ua/~mt/ ICQ: 21134222 The bike is absolute freedom of moving _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
