[ Charset ISO-8859-4 unsupported, converting... ] > hello, > i'm solving such a problem: > router with 3 eth i-faces: > > em0(vlan10) > (vlan1000)fxp0 > em1(vlan11) > > I need to split traffic into two pipes > pipe1 from vlan10 to vlan1000 > pipe2 from vlan11 to vlan1000 > > fxp side supplys traffic to many different subnets > em0 is trunk to the world networks > em1 is trunk to the national networks > so I cannot write these rules in IP level.... > > doing it in the following way doesn't works... > ipfw add pipe1 pass all from any to any via vlan10 in recv vlan1000 > ipfw add pipe1 pass all from any to any via vlan10 out xmit vlan1000 ipfw add pipe 1 ip from any to any out recv vlan10 xmit vlan1000 ipfw add pipe 2 ip from any to any out recv vlan11 xmit vlan1000
or may be better (not exact your ask) ipfw add pipe 1 ip from any to any in recv vlan10 ipfw add pipe 2 ip from any to any in recv vlan11 _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
