[EMAIL PROTECTED] wrote:
Hello,
This is the 2nd time I search for a resolution on this matter I could not find
any documents online regarding this issue.
Why do you post to -net & -bugs, these are not the right lists for this
kind of questions. stable or questions is better, and please don't
cross-post.
At first we started installing FreeBSD5.4-RELEASE AMD64 LSI Megaraid was
detected and raid was running in optimal. When it asked me to choose the slice
it gave me a warning that the geometry for the drive is incorrect and to check
with the BIOS for the true geometry and if this is a SCSI please check with the
controller's algorithem (something). Which I searched online for with no clues.
This is probably harmless, I've never had any problems with it.
Anyways went to system installation it starts installing bursting to 2600KB/s
and after 55% it goes down to 800KB/s than when reaching ports it goes down to
33KB/s and this is CDROM installation!!
The ports are lots of small files it takes time to write these to disk,
this is normal.
When system is installed completly we ran dd on the system a constant average of
2.1MB/s is the BEST performance we could get!
Check that the write cache are enabled on all your SATA disks in CTRL-M
objects->physical drive. I have run the 150-4/6 at over 100MB/s in
FreeBSD so there should be no problem with this setup.
Best Regards,
Martin
--
Martin Nilsson, CTO & Founder, Mullet Scandinavia AB, Malmö, SWEDEN
E-mail: [EMAIL PROTECTED], Phone: +46-(0)708-606170, Web: www.mullet.se
Our business is well engineered servers optimised for FreeBSD & Linux
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"