On Mon, 25 Apr 2005, Michael G. Jung wrote:
FreeBSD firewall.mikej.com 5.4-RC3 FreeBSD 5.4-RC3 #5: Sun Apr 24 19:18:40 EDT 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/FIREWALL i386
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xef00-0xef3f mem 0xfeba0000-0xfebbffff,0xfebc0000-0xfebdffff irq 18 at device 18.0 on pci0
I got several of these card which I have put in FreeBSD/Windows machines.
Under FreeBSD 5.4-RC3 I can not get the card to run at GB.
If I put the same card that fails under FreeBSD in a M$ machine the card works at 1000/Full fine. The card does work at 100/Full in BSD box ok.
if I config the adapter like "ifconfig inet 10.0.0.3 netmask 255.255.255.0 media 1000baseTX mediaopt full-duplex"
and then do ifconfig em0 status shows "NO CARRIER".
Is this a know problem? The card is attached to a DLINK DGS-1005D switch. I have also tried moving the BSD box to a switch port that a M$ machine is working at 1000/Full.
Anyone have ideas on this?
Have you tried autonegotiation ? ( Gigabit ethernet requires full-duplex, and in 99% of the cases should work with autoneg )
-- Sten Spans
"There is a crack in everything, that's how the light gets in." Leonard Cohen - Anthem _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
