On Wed, 19 Jan 2005 13:01:52 -0800, Charlie Schluting <[EMAIL PROTECTED]> wrote:
> Now, in 5.3, the only thing I can get working is to configure the em0 int with > the IP, and set the trunk to have the native vlan corresponding to that IP. > Weird. Sounds like you're not getting the module loaded. By your description above, you're no longer sending tagged frames over the trunk. My rc.conf bits: ifconfig_em1="up media auto" cloned_interfaces="vlan100" ifconfig_vlan100="inet xx.xx.xx.254 netmask 0xffffff00 vlan 100 vlandev em1" > Also, is there a way to stop em(4) from stripping dot1q tags in hardware? I'd > like to see them with tcpdump. What kind of a performance hit does this > involve? # tcpdump -c4 -nvvvei em1 14:24:52.445480 00:30:48:72:f3:0b > 00:09:5b:fc:e4:5f, ethertype 802.1Q (0x8100), length 1532: vlan 100, p 0, ethertype IPv4, IP0 bad-hlen 0 14:24:52.445500 00:30:48:72:f3:0b > 00:09:5b:fc:e4:5f, ethertype 802.1Q (0x8100), length 279: vlan 100, p 0, ethertype IPv4, IP0 bad-hlen 0 14:24:52.445518 00:30:48:72:f3:0b > 00:c0:05:04:00:f0, ethertype 802.1Q (0x8100), length 144: vlan 100, p 0, ethertype IPv4, IP0 bad-hlen 0 14:24:52.445539 00:30:48:72:f3:0b > 00:0f:3d:64:f4:23, ethertype 802.1Q (0x8100), length 72: vlan 100, p 0, ethertype IPv4, IP0 bad-hlen 0 Seems to work fine (it's the -e switch that does it). Hope that helps. _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
