I cannot boot the system with em0 after FreeBSD 5.2.1-RELEASE-p3..
it did work with 5.2-RELEASE-p1, though.

See: http://www.freebsd.org/cgi/query-pr.cgi?pr=65282

One month is over since I submitted the pr, but nobody has
looked at it yet.

Stefan Bethke wrote:

Am 05.05.2004 um 13:31 schrieb Søren Schmidt:

Pawel Jakub Dawidek wrote:

On Wed, May 05, 2004 at 12:42:48PM +0200, Pawel Jakub Dawidek wrote:
+> Hi.
+> +> I've problems with em(4) and IPSEC/FAST_IPSEC and TCP_STREAM netperf test.
+> While running netperf tests between two FreeBSD machines directly connected
+> em0 goes down once every few minutes and I've no idea why.
+> Without IPSEC everything works just fine, with IPSEC/FAST_IPSEC it also
+> works fine but for other tests (UDP_STREAM, TCP_RR, UDP_RR).


For what its worth I have problems with one em based interface as well, it locks the machine solid when used:


me too:
FreeBSD 5.2-CURRENT #0: Tue Apr 13 18:50:30 GMT 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/VERGISSNIX
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xc000-0xc01f
mem 0xf2000000-0xf201ffff irq 12 at device 1.0 on pci2
em0: Bus reserved 0x20000 bytes for rid 0x10 type 3 at 0xf2000000
em0: Bus reserved 0x20 bytes for rid 0x18 type 4 at 0xc000
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:e0:81:27:b6:12
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xd300-0xd33f
mem 0xf1020000-0xf103ffff,0xf1000000-0xf101ffff irq 23 at device 2.0 on pci3
em1: Bus reserved 0x20000 bytes for rid 0x10 type 3 at 0xf1000000
em1: Bus reserved 0x40 bytes for rid 0x18 type 4 at 0xd300
em1: [GIANT-LOCKED]
em1: Ethernet address: 00:e0:81:27:b6:13
em1: Speed:N/A Duplex:N/A


[EMAIL PROTECTED]:1:0: class=0x020000 card=0x10198086 chip=0x10198086 rev=0x00 hdr=0x00
[EMAIL PROTECTED]:2:0: class=0x020000 card=0x10138086 chip=0x10138086 rev=0x00 hdr=0x00


# vmstat -ia
irq12: em0                             0          0
stray irq12                            0          0
irq23: em1                       3916723          3
stray irq23                            0          0

em1 works; after bringing em0 up, machine locks solid after 2 to 5 minutes.




--
              Roberto Nunnari -software engineer-
               mailto:[EMAIL PROTECTED]
 Scuola Universitaria Professionale della Svizzera Italiana
             Dipartimento Tecnologie Innovative
                  http://www.dti.supsi.ch
 SUPSI-DTI
 Via Cantonale                        tel: +41-91-6108561
 6928 Manno                 """       fax: +41-91-6108570
 Switzerland               (o o)
=======================oOO==(_)==OOo========================

_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to