On Friday 06 February 2004 05:07 am, Emre Bastuz wrote: > Hi, > > trying to get my Syskonnect SK-9843 revision 2.0 to work I now have > an interface that is UP ... > > sk0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu > 1500 ether 00:00:5a:9c:38:fe > media: Ethernet autoselect (1000baseSX <full-duplex>) > status: active > > ... but otherwise dead, i.e. passes no traffic.
SysKonnect SK-9843 V2.0 (1000baseSX) is not supported yet. > I´m planning to use the interface for sniffing but tcpdump just > does not receive any data at all. A revision 1.0 of this card works > fine for my 4.9 STABLE box but this one simply does not operate at > all. Old version used SysKonnect's Genesis and XaQti's XMAC II. Version 2.0 has Marvell's 88E8010. They are *very* different. > Do you have any suggestions what I might be missing? If you are willing to try FreeBSD 5.1, SysKonnect has a driver on their website: http://www.syskonnect.com/syskonnect/support/driver/htm/freebsd.htm I didn't try this at all. So, please don't ask me any questions about it. ;-) Thanks, JK > Thanks, > > Emre > > -- > http://www.emre.de UIN: 561260 > PGP Key ID: 0xAFAC77FD > > I don't see why some people even HAVE cars. -- Calvin > > ---------------------------------------------------------------- > This message was sent using IMP, the Internet Messaging Program. _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
