Hi Andre, Thank you for the information.
I have a NAT gateway running with the following ipnat.rules: ----------------------------------------------------------------------- map fxp0 172.22.1.0/24 -> 0.0.0.0/32 proxy port ftp ftp/tcp map fxp0 172.22.1.0/24 -> 0.0.0.0/32 portmap tcp/udp 1025:7999 map fxp0 172.22.1.0/24 -> 0.0.0.0/32 portmap tcp/udp 49152:65535 map fxp0 172.22.1.0/24 -> 0.0.0.0/32 # Internal Servers rdr fxp0 0.0.0.0/0 port 8100 -> 172.22.1.1 port 8100 rdr fxp0 0.0.0.0/0 port 3389 -> 172.22.1.1 port 3389 ----------------------------------------------------------------------- And I have two if's installed, one is fxp0 (configured as 192.168.122.253/24) and the other is dc0(configured as 172.22.1.254/24). When the fastforwarding is set to 0, it works well, however if I turn it to 1, the packets immediately stops to flow between the two if's. (DEVICE_POLLING is enabled). So I guess I have done something wrong? Not so sure in this issue though... Thanks in advance. Xin LI ----- Original Message ----- From: "Andre Oppermann" <[EMAIL PROTECTED]> To: "Xin LI" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Sunday, January 18, 2004 1:53 AM Subject: Re: Newbie question: is net.inet.ip.fastforwarding intended for routersonly? > I have written a new fastforward code for 5.2 and -current which does > everything including ipfw, NAT and ipfilter. _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"
