----- Original Message -----
From: "Yann Nottara" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, July 17, 2003 5:41 PM
Subject: Re: MPD 3.13 PPTP server MTU problems & questions
> Zs you can see in the following real world example, ng0 (which IS up)
> MTU stays at 1500 although it's configured to be at 1460 in the mpd.conf
> configuration file :
>
> ng0: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
> inet6 fe80::2b0:d0ff:fee1:4874%ng0 prefixlen 64 scopeid 0x7
This doesn't look UP to me :)
> ng1: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
> ng2: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
> ng3: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
> ...
>
> Any idea ?
Whenever MPD receives a connection, and assigns that interface to a
client, it will change the MTU and mark it as UP.
At least, it does for me...
Interface down, mpd running, no client connected:
ng0: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::209:5bff:fe2f:692c%ng0 prefixlen 64 scopeid 0x7
Client connects:
ng0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> mtu 1396
inet 192.168.0.1 --> 192.168.0.2 netmask 0xffffffff
inet6 fe80::209:5bff:fe2f:692c%ng0 prefixlen 64 scopeid 0x7
Regards,
-Andy
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
