Le Mercredi 22 Janvier 2003 22:12, Matthew N. Dodd a écrit : > This driver is based on the IDT Nicstar driver by Richard Hodges; I'll do > some diffs and see if there is anything we need from it but we should > already support the IDT chips in -CURRENT.
However, the Richard Hodges' IDT driver only supports the old IDT 77211 Nicstar that is not produced anymore by IDT. Only ATM boards with the 77254 SAR IDT can be found. Moreover they have more features. According to me, both SAR cannot be supported by a same driver because there are too much differences between the two in order to be integrated within the same driver. Regards, Vincent > > On Fri, 3 Jan 2003, Vincent Jardin wrote: > > Prosum just releases an ATM driver for FreeBSD 3.x and 4.x It has some > > nice features: > > - CBR support > > - VBR support > > > > It supports the HARP stack. > > > > The last release of the driver is available on their web site: > > http://www.prosum.fr/atm155_E.html > > > > It works very well with the Prosum's OC3 board ;-) > > > > Regards, > > Vincent > > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > > with "unsubscribe freebsd-atm" in the body of the message To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-net" in the body of the message
