χ Fri, 22.11.2002, Χ 01:01, Maksim Yevmenkin ΞΑΠΙΣΑΜ: > > Is Nokia 6310(i) cell phone supported by FreeBSD bluetooth stack ? > > (of course most interesting as cell modem) > > You have got to try it for yourself :) I have received > successful reports about Nokia 7650, so there is a > pretty good chance you can make it work :) You most > likely can use your Bluetooth enabled cell phone as > a wireless modem. You need to download and install > rfcommd from ports/.
Ok, will try when will get phone. > > What bluetooth adapters (USB/PCMCI/CF) known as work well with FreeBSD. > > USB dongles: 3COM, EPoX, Mitsumi, MSI and TDK. also > if your USB dongle has CSR chip in it then it pretty > much guaranteed to be supported. > > PCCARD: 3COM and Xircom(*). Xircom card is a 16550A > UART based card and may not work very well because of > "sio" driver issues. The same is true for any 16550A > UART based card. However if you can convince your > system give separate IRQ for PCCARD and "sio" driver > uses fast interrupts then this card might work well > for you. I managed to do so on my not so -current > and OLDCARD. If I right understand you I have more chanses with USB adapter Frankly speaking PCMCI do not works well under -CURRENT on my SONY VAIO PCG-z505s Insert/Edject card freeze machine 100% guarntee, so only option to boot with card inserted - in this case it works. This happens both NEWCARD and OLDCARD, -STABLE and -CURRENT My cbb is cbb0: <RF5C475 PCI-CardBus Bridge> Days ago (times of 4.3/4.4) it works well both under current and under stable. May be you have some ideas ? > max -- Vladimir B. Grebenschikov <[EMAIL PROTECTED]> SWsoft Inc. To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-net" in the body of the message
