Re: Arp and Route Commands [sorry]

[Karl Timmermann]

Sorry, I should have tried this out before sending the other email. Your new route comand works, but the arp command says:

set: can only proxy for 10.10.10.0

Any ideas?

Thanks again,

Karl


set: can only proxy for 10.10.10.0
On Sunday, November 17, 2002, at 04:59 PM, Martin J. Muench wrote:

I'm new to the list and was hoping maybe someone could help me. These
commands work in Linux (and in this order), but not in FreeBSD/Mac OS X
as the arp and route commands are different:

arp -s 10.10.10.0 00:00:ca:13:4b:54 -i eth1
arp -s 10.10.10.0 00:00:ca:13:4b:54 -i eth1
route add -net 10.10.10.0 netmask 255.255.255.0 dev eth1
route add default gw 10.10.10.0 dev eth1

anyone know how i would change these commands to work with the FreeBSD
versions of arp and route?

arp -s 10.10.10.0 00:00:ca:13:4b:54
route add -net 0.0.0.0 10.10.10.0 255.255.255.0

These should work just fine.

Btw: reading the manpages arp(8) and route(8) might be a good idea.

  - mjm

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-net" in the body of the message