Leonard Chung writes: > The problem that I'm having is that MPD starts properly and I can > successfully connect to the service using Windows clients. However, when I > ping internal hosts, the first five or so work fine, and then beyond that > packets start getting lost, with a loss rate of around 50%. These tests are > run over a local network with two subnets, so packet loss shouldn't be a > problem. So although I can currently connect and create a tunnel, it isn't > very useful as beyond any initial DNS queries, file transfers, etc. fail > completely.
Are you using Mac OS X clients? If so, you may need the latest patch to ng_pptpgre(4) to work around a problem: http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netgraph/ng_pptpgre.c.diff?r1=1.25&r2=1.26 Otherwise, I haven't heard of anyone else having that particular problem.. See if you have errors reported by 'ngctl msg ng0:inet.ppp.link0 getstats' (replace 'ng0' with the appropriate inteface name). > Also, is there any way to get DHCP to work with MPD rather than hard wire > IPs directly into MPD's config files? Unfortunately not. > I'm guessing this is probably just something easy that I'm missing. My > config files and an MPD trace are below. These look reasonable. -Archie __________________________________________________________________________ Archie Cobbs * Packet Design * http://www.packetdesign.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-net" in the body of the message
