On Sat, Jul 06, 2002 at 03:17:28PM -0700, Patrick Thomas wrote:
>
> I have just purchased a Linksys USB100M - it is a very small key-style USB
> NIC. I am running 5.0-DP1. I have all of the USB items except for the
> removable disk device compiled into my kernel - I also have the three
> aue/cue/kue options compiled into the kernel.
>
> I put the device in and got this message on the console:
>
> Jul 6 15:06:49 hostname kernel: ugen0: Linksys Linksys USB LAN Adapter,
> rev 1.10/1.00, addr 2
>
> Then I ran `usbdevs -v`:
>
> Controller /dev/usb0:
> addr 1: self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev
> 1.00 port 1 addr 2: full speed, power 120 mA, config 1, Linksys USB LAN
> Adapter(0x8150), Linksys(0x0bda), rev 1.00
> port 2 powered
Let's assume for a minute that it's an aue device (are all LinkSys').
Try applying the attached patch file to /sys/dev/usb/if_aue.c and
recompiling the kernel. Do you get an aue0 attaching now when you plug
the adapter in, and does it work?
Joe
Index: if_aue.c
===================================================================
RCS file: /home/ncvs/src/sys/dev/usb/if_aue.c,v
retrieving revision 1.60
diff -u -r1.60 if_aue.c
--- if_aue.c 27 May 2002 00:00:48 -0000 1.60
+++ if_aue.c 7 Jul 2002 10:50:21 -0000
@@ -151,6 +151,7 @@
{{ USB_VENDOR_IODATA, USB_PRODUCT_IODATA_USBETTX}, 0 },
{{ USB_VENDOR_IODATA, USB_PRODUCT_IODATA_USBETTXS}, PII },
{{ USB_VENDOR_KINGSTON, USB_PRODUCT_KINGSTON_KNU101TX}, 0 },
+ {{ USB_VENDOR_LINKSYS, 0x8150 }, LSYS },
{{ USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10TX1}, LSYS|PII },
{{ USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10T}, LSYS },
{{ USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB100TX}, LSYS },
