Hi!
It looks like all my fxp NIC can't upload more than 12Mbps while settled on 100baseTX
full-duplex.
It drops to 600kbps if I set it half-duplex... really weird..
If I set it full-duplex, I can download up to ~90Mbps which looks normal...
If I set it half-duplex, it drops to ~50kbps ....really slow...
I have the same problem with all my fxp cars on all my freebsd boxes.
This is the data from the server:
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem
0xc6f00000-0xc6ffffff,0xc6efd000-0xc6efdfff irq 11 at device 10.0 on$
fxp0: Ethernet address 00:d0:b7:b2:5b:a5
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.100.1 netmask 0xffffff00 broadcast 192.168.100.255
inet6 fe80::2d0:b7ff:feb2:5ba5%fxp0 prefixlen 64 scopeid 0x2
ether 00:d0:b7:b2:5b:a5
media: 100baseTX <full-duplex> status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP
<full-duplex> 10baseT/UTP
It runs on a Compaq Proliant server...
Please reply to my address too..I'm not on freebsd-net..
Thanks a lot!
--
Dominic Blais
Administrateur reseau
Interplex telecom -=[ http://www.interplex.ca ]=-
Email: [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-net" in the body of the message
