I don't know but am quite interested in knowing about that. Couldn't do that
in my case with 4.3version.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 18, 2001 5:08 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: kernel arp messages
Is it possible to specify a gateway for each NIC on the next release of
FreeBSD?
> -----Original Message-----
> From: Anuranjan [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, September 19, 2001 8:02 AM
> To: 'Mike Saunders'; [EMAIL PROTECTED]
> Subject: RE: kernel arp messages
>
> I recently came across the same prblem myself. You're facing it because of
> the same subnet mask on your cards. In freeBSD if you configure two cards
> on the same subnet the kernel gets confused as to which card is the
> gateway
> to the router. THe kernel seems to make this decision based on the fact
> that if you want to configure two cards on the same machine you want to
> use
> it as a gateway between two different networks/subnets.
>
> --A
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Mike Saunders
> Sent: Tuesday, September 18, 2001 4:45 PM
> To: [EMAIL PROTECTED]
> Subject: kernel arp messages
>
>
> Hello!
> I'm hoping somebody can help me with this problem. I'm about at my
> wit's end. The problem is that i'm receiving the following messages
> constantly, at the console, in the syslog, and to root's terminal.
>
> Sep 18 15:01:54 router /kernel: arp: 209.74.92.1 is on xl0 but got reply
> from 00
> :00:a2:66:83:41 on ep0
> Sep 18 15:01:54 router last message repeated 4 times
> Sep 18 15:01:54 router /kernel: arp: 209.74.87.1 is on lo0 but got reply
> from 00
> :60:08:35:57:4e on xl0
> Sep 18 15:01:55 router last message repeated 2 times
> Sep 18 15:01:55 router /kernel: arp: 209.74.87.193 is on ep0 but got reply
> from
> 00:50:da:c7:e7:68 on xl0
> Sep 18 15:01:55 router /kernel: arp: 209.74.87.1 is on lo0 but got reply
> from 00
> :60:08:35:57:4e on xl0
>
> I'm running a 3.4-RELEASE i386 machine with two network cards. The
> machine acts as a router between my LAN and my provider's network. ep0 is
> the NIC connected to my LAN and xl0 is my provider's network.
>
>
> Here's my network configuration:
>
> bash# ifconfig ep0
> ep0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> inet 209.74.87.1 netmask 0xffffff00 broadcast 209.74.87.255
> ether 00:60:08:35:57:4e
> bash# ifconfig xl0
> xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> inet 209.74.92.209 netmask 0xffffff00 broadcast 209.74.92.255
> ether 00:50:da:c7:e3:1a
> media: 10baseT/UTP <half-duplex>
>
> my /etc/rc.conf looks like this:
>
> ifconfig_xl0="inet 209.74.92.209 netmask 255.255.255.0"
> ifconfig_ep0="inet 209.74.87.1 netmask 255.255.255.0"
> hostname="router.cland-minot.com"
> gateway_enable="YES"
> defaultrouter="209.74.92.1"
>
> I tried to enable arpproxy_all="YES" in /etc/rc.conf, but that's
> not helping, I still got spammed by all the arp messages. With the new
> IIS exploit causing such increased traffic flow, the arp messages are
> making console useless by filling the screen as well as lagging the system
> horribly by churning the disk so much (It's only a pentium 60). I can't
> even log into the machine via ssh. The only way to get a shell on it is
> to pull the network lines and use the console.
>
> So, in short, besides redirecting console and syslog to /dev/null,
> what can I do to make these arp messages go away?
>
> Thanks!
>
> -Mike Saunders
> [EMAIL PROTECTED]
>
> Network Administrator - cland-minot.com
> [EMAIL PROTECTED]
>
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-net" in the body of the message
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-net" in the body of the message
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-net" in the body of the message
