Very gently, without wanting to break an existing, working setup
he asks....
Given the following Netgraph Frame Relay configuration,
are these scripts enough to create an mpd-netgraph pptp
connection throught the frame relay internet connection?
Or do I need to add some extra netgraphism's to connect into
the frame relay chain?
Proposed configuration files
mpd.links
frame-pptp:
set link type pptp
set pptp self 10.1.2.30
set pptp enable incoming
set pptp disable originate
mpd.conf
pptp1:
new -i ng0 frame-pptp frame-pptp
set iface disable on-demand
set iface enable proxy-arp
set iface idle 1800
set bundle disable multilink
set bundle authname user1
set link yes acfcomp protocomp
set link no pap chap
set link enable chap
set link keep-alive 10 60
set ipcp yes vjcomp
# require server to be .170 and remote laptop user to be .171
# as first guess
set ipcp ranges 10.1.2.170/32 10.1.2.171/32
# our dns server
set ipcp dns 10.x.y.z
# our WINS servers
set ipcp nbns 10.a.b.c 10.d.e.f
mpd.secret
user1 "pwd1"
-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-
- hardware setup
ng0 ip fxp0 ip
xxx.yyy.zzz.13 SPYDER 10.1.2.30
+----------+ aaa.bbb.ccc.1 alias
| |
+---+ |-+-+ +-|
frame | N | X21 |s|n| |f| 100BaseT
=======| T |========|r|g| |x|~~~~~~~~~~~~
relay | U | |0|0| |p|
+---+ |-+-+ |0|
| +-|
| |
| |
| |
| |
+----------+
Netgraph setup for Frame Relay Internet access
[ ]
[ lmi ](annexD) --------+
[ ] |
|
[sync_sr0] [ ](dlci0) ---+
[physical](rawdata) --- (downstream)[ frame_relay ]
[ ] [ ](dlci16)---+
|
+-----------------------------------------------------------+
|
| { ] [ ng0 ] 10.1.2.30
+--- (downstream)[ rcf1490 ](inet) --- (inet)[ iface ] aaa.bbb.ccc.1
[ ] [ ]
================ start_if.ng0 =============================
#!/bin/sh
# script to set up a frame relay link on the sr card.
# The dlci used is selected below. The default is 16
# WANic 405
CARD=sync_sr0
DLCI=16
# create a frame_relay type node and attach it to the sync port.
ngctl mkpeer ${CARD}: frame_relay rawdata downstream
# Attach the dlci output of the (de)multiplexor to a new
# Link management protocol node using ANSI AnnexD
ngctl mkpeer ${CARD}:rawdata lmi dlci0 annexD
# Attach the DLCI(channel) the Telco has assigned you to
# a node to hadle whatever protocol encapsulation your peer
# is using. In this case rfc1490 encapsulation.
ngctl mkpeer ${CARD}:rawdata rfc1490 dlci${DLCI} downstream
# Attach the ip (inet) protocol output of the protocol mux to the ip (inet)
# input of a netgraph "interface" node (ifconfig should show it as "ng0").
ngctl mkpeer ${CARD}:rawdata.dlci${DLCI} iface inet inet
================end of start_if.ng0 ========================
Murray Taylor
Project Engineer
Bytecraft P/L +61 3 9587 2555
+61 3 9587 1614 fax
[EMAIL PROTECTED]
www.bytecraftentertainment.com
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-net" in the body of the message
