On Mon, 2 Apr 2001, Daniel Wong wrote:
> Hi,
>
> I have four machines, configured as follows.
>
> Machine 1 (leaf node) (defaultrouter to internet gateway)
> fxp0 129.94.232.13
> fxp1 172.21.10.24
>
> Machine 2 (router) (defaultrouter to internet gateway)
> fxp0 129.94.232.14
> fxp1 172.21.10.42
> fxp2 10.0.0.25
>
> Machine 3 (router) (defaultrouter to internet gateway)
> fxp0 129.94.232.14
> fxp1 172.23.10.26
> fxp2 10.0.0.52
>
> Machine 4 (leaf node) (defaultrouter to internet gateway)
> fxp0 129.94.232.5
> fxp1 172.23.10.62
>
> Networks
> 129.94.232/24 - internet world
> 172.21/16 - network 1 (Machine 1/2)
> 172.23/16 - network 2 (Machine 3/4)
> 10/8 - network 3 (Machine 2/3)
>
> I need to get the machine 2 and 3 to route... but I can't get them to
> work...
> each machines all have working connections, I have tested this and each can
> ping adjacent machines. I have enabled net.inet.ip.forwarding and have added
> additional route (by using route add -net ...)
>
> When I try to ping from Machine 4 to Machine 1, it replies "sento: host is
> down"
You need to either run a routing protocol of some kind or add
static routes on ALL 4 of your machines. For static routes, these
should work:
Machine 1:
# route add -net 10.0.0.0 172.21.10.42 -netmask 255.0.0.0
# route add -net 172.23.0.0 172.21.10.42 -netmask 255.255.0.0
Machine 2:
# route add -net 172.23.0.0 10.0.0.52 -netmask 255.255.0.0
Machine 3:
# route add -net 172.21.0.0 10.0.0.25 -netmask 255.255.0.0
Machine 4:
# route add -net 172.21.0.0 172.23.10.26 -netmask 255.255.0.0
# route add -net 10.0.0.0 172.23.10.26 -netmask 255.0.0.0
>
> Can someone help me set this network up ?? I don't know what's wrong. I know
> that it's not being sent out to the internet cause, it behaves differently
> when I set add a route schema in. In my rc.conf I have enabled
> router_enabled="YES" and router="gated" (also tried with "routed") the
> network mask is set as above, though the defaultrouter is set to the router
> of the external network (129.94.232.254)
>
What routing protocol do you have gated setup to run?
Nick Rogness <[EMAIL PROTECTED]>
- Keep on Routing in a Free World...
"FreeBSD: The Power to Serve!"
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-net" in the body of the message
