In in /var/log/messages I have:
Concerning the FTP Methode:
---
Mar 6 11:22:35 homer ftpd[20832]: ANONYMOUS FTP LOGIN REFUSED FROM
<my router>
Mar 6 11:51:47 homer ftpd[21090]: FTP LOGIN FAILED FROM
<my router>, Jean
---
Concerning the TFTP Methode:
---
Mar 6 11:54:17 homer tftpd[21105]: read: Connection refused
Mar 6 11:54:21 homer tftpd[21107]: read: Connection refused
Mar 6 11:54:26 homer tftpd[21109]: read: Connection refused
---
So, finally I have a time out which stop my tftp communication because the
file I want to download cannot be read. Question of access ?
If so, why even with that it is not working properly:
--
%cd /
%ls -l
...
drwxr-xr-x 2 nobody nobody 512 Mar 5 18:37 c3640-i-mz.120-7.XK1.bin
...
---
-------
Jean-Christophe VARAILLON
Network Engineer
VBCnet GB Ltd
Tel:44 (0) 117 929 1316
Fax:44 (0) 117 927 2015
On Tue, 6 Mar 2001, Andy [TECC NOPS] wrote:
> > TFTP Methode:
> > ---
>
> <snip>
>
> Dunno about the tftp operation, could be a number of things.
> Try looking in /var/log/messages for ftpd[xx] error messages.
>
> >
> > FTP Methode:
> > ---
> > Router#copy ftp://x.x.x.48/tftpboot/c3640-i-mz.120-7.XK1.bin flash:
> > Destination filename [c3640-i-mz.120-7.XK1.bin]?
> > Accessing ftp://x.x.x.48/tftpboot/c3640-i-mz.120-7.XK1.bin...
> > %Error opening ftp://x.x.x.48/tftpboot/c3640-i-mz.120-7.XK1.bin
> > (Protocol error)
> > Router#
> > ---
>
> here, you are missing the username:passwd combination. If you have
> a local account on the box, say "jean" then try copying the bin
> flash image to your local account:-
>
> freebsd$ cp /tftpboot/c3640-i-mz.120-7.XK1.bin ~jean/
>
> Then, on the cisco do :-
>
> router> copy ftp://jean:[EMAIL PROTECTED]/c3640-i-mz.120-7.XK1.bin flash:
>
> where you put your local account passwd after ftp://jean:
>
> Regards
> Andy
>
> >
> > This is the sample of /etc/inetd.conf:
> > ---
> > ftp stream tcp nowait root /usr/libexec/ftpd ftpd -l
> > #telnet stream tcp nowait root /usr/libexec/telnetd telnetd
> > #shell stream tcp nowait root /usr/libexec/rshd rshd
> > #login stream tcp nowait root /usr/libexec/rlogind rlogind
> > #finger stream tcp nowait/3/10 nobody /usr/libexec/fingerd fingerd -s
> > #exec stream tcp nowait root /usr/libexec/rexecd rexecd
> > #uucpd stream tcp nowait root /usr/libexec/uucpd uucpd
> > #nntp stream tcp nowait usenet /usr/libexec/nntpd nntpd
> > # run comsat as root to be able to print partial mailbox contents w/ biff,
> > # or use the safer tty:tty to just print that new mail has been received.
> > #comsat dgram udp wait tty:tty /usr/libexec/comsat comsat
> > #ntalk dgram udp wait tty:tty /usr/libexec/ntalkd ntalkd
> > tftp dgram udp wait root /usr/libexec/tftpd tftpd -l
> > -s /tftpboot
> > #bootps dgram udp wait root /usr/libexec/bootpd bootpd
> > ---
> >
> > where:
> > ---
> > %cd /
> > %ls -l
> > ...
> > drwxr-xr-x 2 nobody nobody 512 Mar 5 18:37 tftpboot
> > ...
> > ---
> >
> >
> > Regards,
> > Jean-Christophe.
> >
> > On Tue, 6 Mar 2001, Andy [TECC NOPS] wrote:
> >
> > > I always had these kinda problems both with
> > > FreeBSD, Linux, etc etc. Found various ways
> > > around them in the end but the best way is if
> > > you are running a version of IOS 12.0 or later
> > > on the Cisco then use the newer copy commands
> > > in IOS that allow ftp eg:-
> > >
> > > router> copy ftp://user:[EMAIL PROTECTED]/config.cond startup-config
> > >
> > > much better than :-
> > >
> > > router> copy tftp startup-config
> > >
> > > Regards
> > > Andy
> > >
> > > > -----Original Message-----
> > > > From: [EMAIL PROTECTED]
> > > > [mailto:[EMAIL PROTECTED]]On Behalf Of Alfred Perlstein
> > > > Sent: 05 March 2001 18:23
> > > > To: Jean-Christophe Varaillon
> > > > Cc: [EMAIL PROTECTED]
> > > > Subject: Re: - TFTP: Time out -
> > > >
> > > >
> > > > * Jean-Christophe Varaillon <[EMAIL PROTECTED]> [010305 10:17] wrote:
> > > > >
> > > > > +-----------+ +------------+
> > > > > |FreeBSD 4.1|<--------->| Cisco 3640 |
> > > > > +-----------+ +------------+
> > > > >
> > > > > I want to transfer a file from the FreeBSD machine to the Cisco.
> > > > > My machine is configured as a TFTP server and the cisco is
> > "configured"
> > > > > as a client.
> > > > >
> > > > > The TFTP communication is stopped because of a timeout.
> > > > >
> > > > > Why should I have a timeout ?
> > > >
> > > > Because afaik tftp has a really terrible client/server notion,
> > > > there's no good way to tell if a client has 'gone away'. Without
> > > > the timeout, if a client was to disappear the tftpd server would
> > > > hang around forever.
> > > >
> > > > > BUT, I can transfer a files from the Cisco to my machine witout any
> > > > > trouble. at this moment, the cisco is configured as a TFTP
> > > > Server, and I
> > > > > think that my machine also, but it reacts as a client.
> > > >
> > > > You should probably be able to fix this by changing the value of
> > > > "TIMEOUT" in /usr/src/libexec/tftpd/tftpd.c, then doing this in
> > > > /usr/src/libexec/tftpd:
> > > >
> > > > make ; make install
> > > >
> > > > --
> > > > -Alfred Perlstein - [[EMAIL PROTECTED]|[EMAIL PROTECTED]]
> > > >
> > > > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > > > with "unsubscribe freebsd-net" in the body of the message
> > > >
> > >
> > >
> >
> >
> > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > with "unsubscribe freebsd-net" in the body of the message
> >
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-net" in the body of the message
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-net" in the body of the message
