Hi,
If you want to use sppp with Frame Relay, you should update your sppp
driver.
Here you will find not only sppp driver but also cx, ct and cp drivers:
http://www.cronyx.ru/pub/cronyx/adapters/cfbsd341.tgz
Kurakin Roman
Murray Taylor wrote:
> I am establishing FreeBSD 4.2 Release (from the CD Roms) on a Compaq A550
> and
> I need to setup a connection to a Telstra frame relay interface (which has
> yet to be installed)
>
> (A) Has anyone in .AU done this?
>
> (B) What interface card did you use? and which driver ( sr, ar, cx, ?? )
>
> (C) Which distributor did you get the card from?
>
> (D) what software i/face are you using, do you recommend (sppp / netgraph /
> ?? )
> (I have read the frame_relay item in the netgraph examples, but
> otherwise have no
> direct experience with netgraph)
>
> I have recompiled the kernel to add IPFW, NETGRAPH and drop some uneeded net
> devices and am
> quite OK do do so as needed again. (FreeBSD on my home machine since 2.2.2)
>
> Note the hostname in the dmesg is a dummy used for internal testing prior to
> domain registration
>
> Murray Taylor
> Project Engineer
>
> Bytecraft P/L +61 3 9587 2555
> +61 3 9580 7690 fax
> [EMAIL PROTECTED]
>
>
>
>
> Current dmesg:
>
> Copyright (c) 1992-2000 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.2-RELEASE #0: Mon Feb 19 10:01:04 EST 2001
> [EMAIL PROTECTED]:/usr/src/sys/compile/SPYDER
> Timecounter "i8254" frequency 1193182 Hz
> Timecounter "TSC" frequency 863933901 Hz
> CPU: Pentium III/Pentium III Xeon/Celeron (863.93-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x683 Stepping = 3
>
> Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory = 536805376 (524224K bytes)
> avail memory = 519200768 (507032K bytes)
> Preloaded elf kernel "kernel" at 0xc0350000.
> Preloaded userconfig_script "/boot/kernel.conf" at 0xc035009c.
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pcib1: <PCI to PCI bridge (vendor=8086 device=1a23)> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <NVidia Quadro graphics accelerator> at 0.0 irq 11
> pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
> pci2: <PCI bus> on pcib2
> fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x5400-0x543f mem
> 0xefe00000-0xefefffff,0xefd00000-0xefd00fff irq 11 at device 2.0 on pci2
> fxp0: Ethernet address 00:50:8b:f1:de:df
> ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x5000-0x50ff mem
> 0xeff00000-0xeff00fff irq 11 at device 7.0 on pci2
> aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs
> pci2: <unknown card> (vendor=0x1274, dev=0x5880) at 11.0 irq 11
> isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH ATA66 controller> port 0x6460-0x646f at device 31.1 on
> pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <Intel 82801AA (ICH) USB controller> port 0x6440-0x645f irq 11 at
> device 31.2 on pci0
> usb0: <Intel 82801AA (ICH) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 11
> chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port
> 0x6400-0x643f,0x6000-0x60ff irq 11 at device 31.5 on pci0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/13 bytes threshold
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> IP packet filtering initialized, divert disabled, rule-based forwarding
> disabled, default to accept, logging limited to 100 packets/entry by default
> ata1-slave: ata_command: timeout waiting for intr
> ata1-slave: identify failed
> acd0: CDROM <Compaq CRD-8402B> at ata1-master using PIO4
> Waiting 5 seconds for SCSI devices to settle
> Mounting root from ufs:/dev/da0s2a
> da0 at ahc0 bus 0 target 0 lun 0
> da0: <COMPAQPC ATLAS10K2-TY184L DDC2> Fixed Direct Access SCSI-3 device
> da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing
> Enabled
> da0: 17366MB (35566000 512 byte sectors: 255H 63S/T 2213C)
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-net" in the body of the message
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-net" in the body of the message
