Thanks for your prompt repply.
On Tue, 20 Feb 2001, Andy [TECC NOPS] wrote:
> Hi
>
> Think I know more about Cisco than RISCom cards
> but here's my 2p worth:-
>
> 1. I take it the connecting cable is an X21 null
> modem cable? If so, you have got it the right
> way round cos the connectors are the same and one
> end is dce the other dte.
I have 2 cables plugged together:
1 2
Cisco }------{ }------{ Free BSD
a b
Cable 1:
On the cisco end: X21 DCE
On the other extremity (a): Female like this:
........
......
Cable 2
On the extremity (b): Male like that:
........
......
On the FreeBSD end: It is a male like this:
........
........
.......
> 2.
Serial0/0 is up, line protocol is down
The clock is set (by the router) at clockrate 2015232
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Jean-Christophe
> > Varaillon
> > Sent: 20 February 2001 14:18
> > To: [EMAIL PROTECTED]
> > Subject: - RISCom card: lcp illegal conf-req in state initial -
> >
> >
> > Hi all,
> >
> > I am actualy trying to establish the communication between a cisco router
> > and my Free BSD machine.
> >
> > +-------+ +---------------+
> > | cisco |serial interface | FreeBSD 4.1 |
> > | 3600 +-------------------+ |
> > | | RISCom | |
> > +-------+ card +---------------+
> > x.x.x.145 x.x.x.146
> >
> > I beleive that the router is correclty configured but NOT the FreeBSD
> > machine.
> >
> > This is what dmesg | grep sr1 shows:
> > --------
> > sr1: Adapter 0, port 1.
> > sr1 XXX: driver didn't set ifq_maxlen
> > sr1: transmit failed, ST0 80, ST1 48, ST3 0f, DSR 01.
> > ...
> > sr1: transmit failed, ST0 80, ST1 48, ST3 0f, DSR 01.
> > sr1: transmit failed, ST0 80, ST1 48, ST3 0f, DSR 01.
> > sr1: Down event, taking interface down.
> > ...
> > sr1: Down event, taking interface down.
> > sr1: Down event, taking interface down.
> > sr1: lcp illegal conf-req in state initial
> > ...
> > sr1: lcp illegal conf-req in state initial
> > sr1: lcp illegal conf-req in state initial
> > --------
> >
> > This is the ifconfig:
> > -------
> > sr1: flags=8451<UP,POINTOPOINT,RUNNING,OACTIVE,MULTICAST> mtu 1500
> > inet6 fe80::2d0:b7ff:fe09:3333%sr1 --> :: prefixlen 64
> > scopeid 0x2
> > inet x.x.x.146 --> x.x.x.145 netmask 0xfffffffc
> > ------
> >
> > Thanks,
> >
> > JC.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-net" in the body of the message
