Problem with Multihomed Machine

[Sean]

Hello.  I'm having some problems setting up a multihomed machine and was wondering if someone could point me in the right direction.  I have a FreeBSD box with 2 ethernet cards.  One card, rl0, is connected to my cable modem.  The other card, rl1, is connected to a Win2000 box.   The goal is to have FreeBSD act as a firewall for the Win2000 machine.  I have set the IP address of the internal network card (rl1) to 10.0.0.1, and I have the IP address of Win2000 set as 10.0.0.2, with a gateway of 10.0.0.1.  The problem I'm having is, I can't get Win2000 to do anything to try and connect to FreeBSD, it won't even do a ping of the FreeBSD machine.  From FreeBSD, I can get on the internet, and ping Win2000, but, Win2000 won't connect to anything.  I've read quite a few howtos on natd and setting up a firewall, but, I can't figure out why it's not working.  Just from looking at the Win2000 settings, it appears it's set up right, so, I am wondering if I'm doing something wrong in FreeBSD.

Below I've included the output from ifconfig -a, netstat -rn and netstat -in.  Any help would be greatly appreciated.

IFCONFIG -A
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
 inet 24.14.186.233 netmask 0xffffff80 broadcast 24.14.186.255
 inet6 fe80::200:21ff:fedb:7c22%rl0 prefixlen 64 scopeid 0x1
 ether 00:00:21:db:7c:22
 media: autoselect (none) status: active
 supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback>
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
 inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
 inet6 fe80::250:baff:fed3:5b03%rl1 prefixlen 64 scopeid 0x2
 ether 00:50:ba:d3:5b:03
 media: autoselect (100baseTX <full-duplex>) status: active
 supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback>
 

NETSTAT -RN
Routing tables

Internet:
Destination        Gateway            Flags      Netif Expire
default            24.14.186.129      UGSc        rl0
10/24              link#2             UC          rl1 =>
24.14.186.128/25   link#1             UC          rl0 =>
24.14.186.129      0:30:80:6e:e8:70   UHLW        rl0    823
24.14.186.255      ff:ff:ff:ff:ff:ff  UHLWb       rl0
127.0.0.1          127.0.0.1          UH          lo0
 

NETSTAT -IN
Name  Mtu   Network       Address            Ipkts Ierrs    Opkts Oerrs  Coll
rl0   1500  <Link#1>    00:00:21:db:7c:22       52     0       11     0     0
rl0   1500  24.14.186.128 24.14.186.233         52     0       11     0     0
rl0   1500  fe80:1::200 fe80:1::200:21ff:       52     0       11     0     0
rl1   1500  <Link#2>    00:50:ba:d3:5b:03       19     0        9     0     0
rl1   1500  10/24         10.0.0.1              19     0        9     0     0
rl1   1500  fe80:2::250 fe80:2::250:baff:       19     0        9     0     0

Sean Chisek
[EMAIL PROTECTED]