At 4:19 PM +0000 12/11/00, Mark Wright wrote:
>I'm trying to get frame relay working with a lmc1200 card,
and I'm getting
>the following error:
>
>sj# ngctl mkpeer lmc0: frame_relay rawdata downstream
>sj# ngctl mkpeer lmc0:rawdata lmi dlci0 auto0
>sj# ngctl mkpeer lmc0:rawdata rfc1490 dlci15 downstream
>ngctl: send msg: No such file or directory
>
>What does that mean? Should I be concerned that ifconfig -a doesn't reveal
>the lmc0? Or does it show up only after I do a 'ngctl interface'? It shows
>the following error:
>
>sj# ngctl mkpeer lmc0: frame_relay rawdata downstream
>sj# ngctl mkpeer lmc0:rawdata lmi dlci0 auto0
>sj# ngctl mkpeer lmc0:rawdata rfc1490 dlci15 downstream
>ngctl: send msg: No such file or directory
>
>What does that mean? Should I be concerned that ifconfig -a doesn't reveal
>the lmc0? Or does it show up only after I do a 'ngctl interface'? It shows
>up in dmesg:
Well, Archie and Julian are the experts on these things :-) but I
think this might work for you. Give it a try...
ngctl mkpeer
lmc0: frame_relay rawdata downstream
ngctl mkpeer
lmc0:rawdata lmi dlci0 auto0
ngctl
connect lmc0:rawdata lmc0:rawdata.dlci0 dlci1023 auto1023
ngctl mkpeer
lmc0:rawdata rfc1490 dlci15 downstream
ngctl mkpeer
lmc0:rawdata.dlci15 iface inet inet
ifconfig ngX
1.2.3.4 5.6.7.8 netmask 255.255.255.255
Mark
---------
Mark Peek
Director of Internet Technology
IBM Global Small Business/Whistle Communications
Mark Peek
Director of Internet Technology
IBM Global Small Business/Whistle Communications
Work: (650) 577-7052 Email:
[EMAIL PROTECTED]
