Hello.
Recently bought a new system and am experiencing problems with system freezes.
I think the most likely culprit is DRI. The freezes occur apparently at random.
I've disabled drm.ko and radeon.ko and the system doesn't appear to have frozen
yet.
I'm running 7.2-PRERELEASE (STABLE as of yesterday).
Machine's dmesg:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-PRERELEASE #0: Fri Apr 10 00:09:48 BST 2009
r...@viper.internal.network:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2665.04-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a4 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,<b20>,<b23>>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Cores per package: 8
Logical CPUs per core: 2
usable memory = 12862480384 (12266 MB)
avail memory = 12424323072 (11848 MB)
ACPI APIC Table: <121008 APIC1726>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <121008 RSDT1726> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci7: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci6: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem
0xd0000000-0xdfffffff,0xfbee0000-0xfbeeffff irq 16 at device 0.0 on pci6
drm0: <ATI Radeon X1950> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.29.0 20080528
vgapci1: <VGA-compatible display> mem 0xfbef0000-0xfbefffff at device 0.1 on
pci6
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver
attached)
uhci0: <UHCI (generic) USB controller> port 0x9080-0x909f irq 16 at device 26.0
on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x9400-0x941f irq 21 at device 26.1
on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x9480-0x949f irq 19 at device 26.2
on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfb9f6000-0xfb9f63ff irq 18 at
device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
uhub4: <NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr
2> on uhub3
uhub4: single transaction translator
uhub4: 4 ports with 4 removable, self powered
ukbd0: <Griffin Technology, Inc. iMate, USB To ADB Adaptor, class 0/0, rev
1.00/3.70, addr 3> on uhub4
kbd2 at ukbd0
ums0: <Griffin Technology, Inc. iMate, USB To ADB Adaptor, class 0/0, rev
1.00/3.70, addr 3> on uhub4
ums0: 3 buttons.
ums1: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 4> on uhub4
ums1: 3 buttons and Z dir.
uhub5: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev
1.10/4.10, addr 5> on uhub4
uhub5: 3 ports with 2 removable, bus powered
ugen0: <WIBU-SYSTEMS AG, www.wibu.com WIBU-BOX/RU, class 255/0, rev 1.10/1.04,
addr 6> on uhub5
ukbd1: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.10,
addr 7> on uhub5
kbd3 at ukbd1
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.10,
addr 7> on uhub5
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib4
atapci0: <JMicron JMB363 SATA300 controller> port
0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
0xfbdfe000-0xfbdfffff irq 16 at device 0.0 on pci4
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit
Ethernet> port 0xc800-0xc8ff mem 0xfbcff000-0xfbcfffff,0xcfff0000-0xcfffffff
irq 17 at device 0.0 on pci3
re0: Using 1 MSI messages
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re0: Ethernet address: 00:e0:4d:b3:5b:bd
re0: [FILTER]
pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib6
re1: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit
Ethernet> port 0xb800-0xb8ff mem 0xfbbff000-0xfbbfffff,0xcfef0000-0xcfefffff
irq 18 at device 0.0 on pci2
re1: Using 1 MSI messages
re1: Chip rev. 0x3c000000
re1: MAC rev. 0x00400000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re1: Ethernet address: 00:e0:4d:b3:5b:be
re1: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0x9800-0x981f irq 23 at device 29.0
on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub6: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x9880-0x989f irq 19 at device 29.1
on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub7: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub7: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0x9c00-0x9c1f irq 18 at device 29.2
on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub8: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub8: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfb9fc000-0xfb9fc3ff irq 23 at
device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub9: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub9: 6 ports with 6 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib7
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xfbaff800-0xfbafffff,0xfbaf8000-0xfbafbfff irq 19 at device 7.0 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:00:00:00:07:7b:3d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x199c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:07:7b:3d
fwe0: Ethernet address: 02:00:00:07:7b:3d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:00:00:00:07:7b:3d @ 0xfffe00000000, S400, maxrec
2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH10 SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff90-0xff9f,0xffa0-0xffaf at device 31.2
on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH10 SATA300 controller> port
0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f,0xa080-0xa08f
irq 19 at device 31.5 on pci0
atapci2: [ITHREAD]
ata5: <ATA channel 0> on atapci2
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
ata6: [ITHREAD]
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 6, should
be FE [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 14
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 14
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 14
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 14
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 76319MB <WDC WD800AAJS-00WAA0 58.01D58> at ata0-master SATA300
ad2: 953869MB <WDC WD10EADS-00L5B1 01.01A01> at ata1-master SATA300
GEOM_LABEL: Label for provider ad0s1a is ufsid/49dd1626d599346c.
GEOM_LABEL: Label for provider ad0s1d is ufsid/49dd1626c888923e.
GEOM_LABEL: Label for provider ad0s1e is ufsid/49dd16280e8a20d0.
GEOM_LABEL: Label for provider ad0s1f is ufsid/49dd1626ed87573c.
acd0: DVDR <TSSTcorp CDDVDW SH-S222A/SB01> at ata4-master UDMA66
SMP: AP CPU #1 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
Trying to mount root from ufs:/dev/ad0s1a
cryptosoft0: <software crypto> on motherboard
GEOM_ELI: Device ad0s1b.eli created.
GEOM_ELI: Encryption: AES-CBC 256
GEOM_ELI: Crypto: software
GEOM_LABEL: Label ufsid/49dd1626d599346c removed.
GEOM_LABEL: Label for provider ad0s1a is ufsid/49dd1626d599346c.
GEOM_LABEL: Label ufsid/49dd1626c888923e removed.
GEOM_LABEL: Label for provider ad0s1d is ufsid/49dd1626c888923e.
GEOM_LABEL: Label ufsid/49dd1626ed87573c removed.
GEOM_LABEL: Label for provider ad0s1f is ufsid/49dd1626ed87573c.
GEOM_LABEL: Label ufsid/49dd16280e8a20d0 removed.
GEOM_LABEL: Label for provider ad0s1e is ufsid/49dd16280e8a20d0.
GEOM_LABEL: Label ufsid/49dd1626d599346c removed.
GEOM_LABEL: Label ufsid/49dd1626c888923e removed.
GEOM_LABEL: Label ufsid/49dd1626ed87573c removed.
GEOM_LABEL: Label ufsid/49dd16280e8a20d0 removed.
re0: link state changed to UP
I've not been able to obtain anything in the way of crash logs. The system
just freezes and doesn't respond to keyboard, mouse, network activity,
shouting and/or threats.
I've run memtest86+ for hours with no errors, tested the CPU with various
utilities and run WD's hard disk diagnostic tools. As I said, DRI seems
the likely culprit. Unfortunately I can't do without DRI as this machine's
intended for OpenGL development and video editing.
Any advice would be much appreciated. I'm under slight time pressure to
get this system up and running.
thanks,
xw
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hackers-unsubscr...@freebsd.org"
