On Wed, Mar 04, 2009 at 08:56:14PM +0100, Joerg Sonnenberger wrote: > On Wed, Mar 04, 2009 at 08:38:52PM +0100, Oliver Fromme wrote: > > Octavian Covalschi wrote: > > > I'm looking a way to spin down HDD just right before power off. Why? > > > > > > Because currently when I call "shutdown -p now", HDD is powered off at > > it's > > > full speed (7200.4) and as a result > > > I hear a noise of stopping/spinning down of HDD, and _this_ concerns me > > as > > > I'm afraid it can damage HDD. > > > > You don't have to spin down a disk before powering it off. > > The noise you hear is probably caused by the "autopark" > > feature of the drive. It is harmless. > > This is not true. Many hard disks don't like having to do an emergency > shutdown as it affects the disk life time negatively. That's what > happens if you poweroff the machine when the disks are still spinning.
I believe you are incorrect. Most hard drives do an "autopark" of the head into the landing zone (which is near the spindle) when power is lost. My understanding is that because it is spinning so fast, the heads can fly for quite a long time so the HDD has enough time to autopark and such an operation does not consume much power. Thus the operation can be performed with a little capacitance or by using some of the mechanical energy in the spindle. If drives did not auto, there would be orders of magnitude more failures due to head crashes. The heads absolutely have to be retracted into the landing zone if the spindle speed is too low or the drive will fail. What's actually bad for the drives is the actual spinup and spindowns, which require the head to sit in the very bumpy landing zone until the drive reaches optimal spindle speed and thus enough airflow to safely move the heads around the platter without contact. Strangely, atacontrol(8) has a command for spindown (which is inherently bad for drives yet still a reasonable feature) but there is no command for spinup. I wish there was a spinup command because I've seen drives that won't do a spinup until they receive a special ATA command. I was never able to find any docs, so if anyone knows the command I'd be willing to write a patch against atacontrol! -- Rick C. Petty _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "freebsd-hackers-unsubscr...@freebsd.org"
